Lens Protection
렌즈 프로텍션
Lens Protection is a hardening coating formulated specifically for polycarbonate headlight and tail-lamp lenses, slowing UV-induced yellowing and degradation of the hard coat. Its resin-specific formula protects against external factors that cause lens cloudiness or hard-coat peeling, helping avoid costly lens polishing or replacement.
Lens Protection은 폴리카보네이트 헤드라이트 및 테일램프 렌즈 전용으로 설계된 경화계 코팅제로, 자외선으로 인한 황변 및 하드 코팅 박리 속도를 늦춥니다. 수지 전용 성분 조정으로 렌즈 흐림이나 하드 코팅 벗겨짐을 유발하는 외부 요인으로부터 렌즈를 보호하여 고가의 렌즈 연마 또는 교체를 예방합니다.
- Brand
- Ganbass
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Formulated specifically for polycarbonate resin lenses
- Slows UV-induced yellowing and hard-coat peeling
- Forms a hard protective film on headlight and tail-lamp lenses
- Easy application — apply and wipe off
- Estimated effective period: 6–12 months per application
- Also applicable to sun visor lenses
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- After washing, remove any contaminants from the lens surface. On severely degraded lenses with peeling hard coat, consider sanding first, though this carries risk — hand-polishing with the store's abrasive to address yellowing may be the safer option.
- Apply an adequate amount to a microfiber cloth or cotton pad and work it evenly into the lens surface.
- Immediately wipe off the excess with a separate cloth. Allow at least 1–2 hours before the surface gets wet or is touched.
핵심 특징
- 폴리카보네이트 수지 렌즈 전용 제형
- 자외선에 의한 황변 및 하드 코팅 박리 속도 억제
- 헤드라이트 및 테일램프 렌즈에 강한 보호 피막 형성
- 간편 시공 — 도포 후 닦아내기
- 효과 지속 기간 약 6~12개월
- 선바이저 렌즈에도 적용 가능
사용법
- 세차 후 렌즈 표면의 이물질을 제거합니다. 하드 코팅이 심하게 박리된 중고 렌즈는 사전 샌딩이 권장되지만 실패 위험이 있으므로, 황변 제거 정도라면 연마제 손 작업으로 타협하는 것이 안전할 수 있습니다.
- 마이크로파이버 클로스 또는 코튼에 적당량을 적셔 렌즈 표면에 고르게 바릅니다.
- 바른 즉시 다른 클로스로 잔여분을 닦아냅니다. 이후 최소 1~2시간은 물에 젖히거나 접촉하지 않도록 합니다.
Also known as: 간바스, ganbas, Ganbass Lens Protection, LP, Ganbass LP, 간바스 렌즈 프로텍션