SWAG 타르 글루 리무버 젤+ V.2 희석비 & 사용 가이드

SWAG 타르 글루 리무버 젤+ V.2 희석비 pH 스펙 카드

TAR GLUE REMOVER GEL+ V.2

차체, 휠, 유리에 붙은 아스팔트와 유분, 접착제 잔여물을 녹여 내는 용제형 제거제입니다. 젤 제형이라 수직면에도 흘러내리지 않고 머물러 오염물을 충분히 분해하며, 마운팅 페이스트나 스티커 자국에도 사용합니다. 광택 작업과 코팅 전 도장면 탈철·탈지 공정의 첫 단계로 쓰이는 제품입니다.

브랜드
SWAG
카테고리
Exterior : Remover
기본 희석 비율
RTU
최종 업데이트
2026-08-01

핵심 특징

희석 비율

용도희석비율
Exterior : Remover (기본)RTU1:0

사용법

  1. 그늘에서 서늘하고 깨끗한 표면에 작업합니다.
  2. 건조한 표면에 어플리케이터나 분무기로 도포합니다.
  3. 최대 10분간 두되 제품이 마르지 않게 합니다.
  4. 표면을 물로 헹굽니다.
  5. 이후 SWAG APC나 SWAG NEUTRAL SHAMPOO로 차량을 세차합니다.
  6. 잘 지워지지 않는 부위는 마이크로파이버에 제품을 적셔 부분 작업하거나, 분무 후 플라스틱 블레이드로 오염물을 떼어 냅니다.
  7. 마무리로 클레이바를 사용해 남은 고착 오염물을 제거합니다.

A solvent-type remover that lifts asphalt, grease and adhesive residue from bodywork, wheels and glass. The gel body clings to vertical surfaces so it stays in contact with the deposit long enough to break it down, including leftovers from mounting pastes and stickers. It is positioned as the first stage of a full paint decontamination before correction and coating.

Key features

  • Gel body clings to vertical panels
  • Removes tar, grease and adhesive residue
  • Fast acting on embedded deposits
  • First step of paint decontamination
  • Safe for the treated surface
  • Banana gum fragrance

Usage

  1. Work in the shade on a cool, clean surface.
  2. Apply to the dry surface with an applicator or a spray bottle.
  3. Leave for up to 10 minutes and do not let the product dry out.
  4. Rinse the surface with water.
  5. Wash the vehicle afterwards with SWAG APC or SWAG NEUTRAL SHAMPOO.
  6. For stubborn spots, saturate a microfiber cloth and treat the area directly, or spray it and lift the deposit with a plastic blade.
  7. Finish by removing any remaining bonded contamination with a clay bar.

다른 이름: 스웨그, 스웩, Swag TAR GLUE REMOVER GEL+ V.2, TGR, Swag TGR, 스웨그 타르 글루 리무버 젤+, 스웨그 TGR

View in English

출처

관련 제품

SWAG의 다른 제품

같은 카테고리(Remover) 제품

더 보기