Fictech 애시드 러스트 리무버 933 희석비 & 사용 가이드

Fictech 애시드 러스트 리무버 933 희석비 pH 스펙 카드

Acid Rust Remover 933

오염된 표면의 재생과 탈산(산화 제거)을 위해 설계된 고농축 산성 제품(pH 약 0)입니다. 도장 차체·고무 실링·다양한 소재에서 녹·산화물·고착된 미네랄 침전물을 제거해 깨끗한 마감을 되살립니다. 매우 강한 산성이므로 짧은 접촉 시간으로 사용하고, 알루미늄이나 아노다이징 금속에는 절대 사용하지 않으며, 항상 충분히 헹궈냅니다.

브랜드
Fictech
카테고리
Exterior : Remover
기본 희석 비율
1:3~1:12
pH
acid (1)
최종 업데이트
2026-07-12

핵심 특징

희석 비율

용도희석비율
Exterior : Remover (기본)1:3~1:121:3-12

사용법

  1. 강산성 제품이므로 취급 전 장갑과 보안경을 착용합니다.
  2. 중작업은 약 1:3~1:4, 경작업 유지관리는 1:10~1:12로 물에 희석합니다.
  3. 오염 표면에 도포하고 짧은 접촉 시간만 두며 절대 마르게 두지 않습니다.
  4. 필요하면 가볍게 문지르되 알루미늄·아노다이징 금속에는 닿지 않게 합니다.
  5. 작업 직후 표면을 물로 충분히 헹궈냅니다.

A concentrated acidic preparation (pH ~0) designed for the renovation and deoxidation of contaminated surfaces. It strips rust, oxidation and stubborn mineral deposits from painted bodywork, rubber seals and various substrates, restoring a clean finish. Because it is extremely acidic it is used at short contact time, must never be applied to aluminium or anodized metals, and is always rinsed abundantly.

Key features

  • Concentrated acidic pH ~0 deoxidizer
  • Removes rust, oxidation and mineral deposits
  • Works on painted bodywork, rubber and substrates
  • Dilutes 1:3 for heavy renovation to 1:12 for light use
  • Short contact time, rinse abundantly

Usage

  1. Wear gloves and eye protection before handling this strongly acidic product.
  2. Dilute with water from about 1:3–1:4 for heavy renovation up to 1:10–1:12 for light maintenance.
  3. Apply to the contaminated surface and leave only a brief contact time — never let it dry.
  4. Agitate lightly if needed, keeping the product off aluminium and anodized metals.
  5. Rinse the surface abundantly with water immediately after treatment.

다른 이름: 피크테크, fic, FicTech Acid Rust Remover 933, Fictech Acid Rust Remover 933, 933, FicTech 933, 애시드 러스트 리무버, 픽테크 애시드 러스트 리무버, Derouillant Acide 933, FicTech 933 Rust Remover

View in English

출처

관련 제품

Fictech의 다른 제품

같은 카테고리(Remover) 제품

더 보기