servFaces 메탈 코팅 희석비 & 사용 가이드

servFaces 메탈 코팅 희석비 pH 스펙 카드

Metal Coating

스테인리스 스틸, 구리, 청동, 알루미늄, 아연 도금 금속 등 다양한 금속에 쓰는 투명한 경질 표면 코팅입니다. 긁힘, 오염, 산, 염분과 1,800도까지의 열에 견디는 내구성 있는 보호층을 만듭니다. 완전히 경화되면 식품 안전 인증을 받으며 스테인리스 지문을 최대 90%까지 줄여 줍니다.

브랜드
servFaces
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 도포 전 표면을 깨끗이 세척하고 기름기가 없는지 확인합니다.
  2. 전용 도포기로 매끄러운 표면에 소량씩 바르거나 미세 분무 또는 롤러로 도포합니다.
  3. 약 1~2분 후 마이크로파이버 천으로 잉여 제품을 닦아냅니다.
  4. 약 120분간 두면 표면 건조가 끝나며, 온도와 습도에 따라 약 6~8일 후 완전히 경화됩니다.
  5. 15~35도 사이에서 도포하면 가장 좋은 결과를 얻습니다.

A clear, hard surface coating for many metals including stainless steel, copper, bronze, aluminium, and galvanised metal. It builds a durable protective layer that resists scratches, dirt, acids, salts, and heat up to 1,800 degrees Celsius. Once fully cured it is food-safe and can cut fingerprints on stainless steel by up to 90%.

Key features

  • For copper, bronze, stainless steel, aluminium, galvanised and ferrous metals
  • Hard protective layer resists scratches and dirt
  • Resists acids, salts, and weather
  • Withstands heat up to 1,800 degrees Celsius
  • Self-healing thermoelastic behaviour
  • Cuts fingerprints on stainless steel by up to 90%
  • Food-safe once fully cured

Usage

  1. Clean the surface thoroughly and make sure it is grease-free before applying.
  2. Apply sparingly to smooth surfaces with the applicator, or by fine spray or roller.
  3. After about 1 to 2 minutes, wipe off any excess with a microfibre cloth.
  4. Let it dry about 120 minutes until dust-dry; full cure takes roughly 6 to 8 days depending on temperature and humidity.
  5. Apply between 15 and 35 degrees Celsius for a better result.

다른 이름: serv, 서브페이스, 서브, servFaces Metal Coating, SF Metal Coating, MC, servFaces MC, SF MC, 서브페이시스 메탈 코팅, 서브페이시스 MC, SF10076.1

View in English

출처

관련 제품

servFaces의 다른 제품

같은 카테고리(Coating) 제품

더 보기