servFaces Metal Coating Dilution Ratios & User Guide
메탈 코팅
servFaces Metal Coating — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/servfaces/metal-coating
servFaces 메탈 코팅 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/servfaces/metal-coating
A clear, hard surface coating for many metals including stainless steel, copper, bronze, aluminium, and galvanised metal. It builds a durable protective layer that resists scratches, dirt, acids, salts, and heat up to 1,800 degrees Celsius. Once fully cured it is food-safe and can cut fingerprints on stainless steel by up to 90%.
스테인리스 스틸, 구리, 청동, 알루미늄, 아연 도금 금속 등 다양한 금속에 쓰는 투명한 경질 표면 코팅입니다. 긁힘, 오염, 산, 염분과 1,800도까지의 열에 견디는 내구성 있는 보호층을 만듭니다. 완전히 경화되면 식품 안전 인증을 받으며 스테인리스 지문을 최대 90%까지 줄여 줍니다.
- Brand
- servFaces
- Categories
- Exterior : Coating
- Primary dilution
- RTU
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-09-07
How it works
- Polysilazane — Cures into a hard inorganic film.
- Alkoxysilane — Reacts with moisture to bond chemically to the surface.
- Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| n-Butylacetat | 123-86-4 | Solvent |
| organische Polysilazan Verbindung | 475645-84-2 | Film former |
| Toluol | 108-88-3 | Solvent |
| d 3-Aminopropyltriethoxysilan; 3-(Triethoxysilan)-propan-1-amin | 919-30-2 | Film former |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- For copper, bronze, stainless steel, aluminium, galvanised and ferrous metals
- Hard protective layer resists scratches and dirt
- Resists acids, salts, and weather
- Withstands heat up to 1,800 degrees Celsius
- Self-healing thermoelastic behaviour
- Cuts fingerprints on stainless steel by up to 90%
- Food-safe once fully cured
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Coating (primary) | RTU | 1:0 |
Usage
- Clean the surface thoroughly and make sure it is grease-free before applying.
- Apply sparingly to smooth surfaces with the applicator, or by fine spray or roller.
- After about 1 to 2 minutes, wipe off any excess with a microfibre cloth.
- Let it dry about 120 minutes until dust-dry; full cure takes roughly 6 to 8 days depending on temperature and humidity.
- Apply between 15 and 35 degrees Celsius for a better result.
핵심 특징
- 구리·청동·스테인리스·알루미늄·아연 도금·철금속에 적합
- 긁힘과 오염에 강한 경질 보호층
- 산, 염분, 기상에 대한 내성
- 1,800도까지의 열에 내성
- 자가 복원 열탄성 특성
- 스테인리스 지문 최대 90% 감소
- 완전 경화 후 식품 안전
사용법
- 도포 전 표면을 깨끗이 세척하고 기름기가 없는지 확인합니다.
- 전용 도포기로 매끄러운 표면에 소량씩 바르거나 미세 분무 또는 롤러로 도포합니다.
- 약 1~2분 후 마이크로파이버 천으로 잉여 제품을 닦아냅니다.
- 약 120분간 두면 표면 건조가 끝나며, 온도와 습도에 따라 약 6~8일 후 완전히 경화됩니다.
- 15~35도 사이에서 도포하면 가장 좋은 결과를 얻습니다.
Also known as: serv, 서브페이스, 서브, servFaces Metal Coating, SF Metal Coating, MC, servFaces MC, SF MC, 서브페이시스 메탈 코팅, 서브페이시스 MC, SF10076.1
Sources
Related products
More from servFaces
More Coating products
- P&S Challenger Boat, RV & Aircraft Wax
- Clean By Pan 1-Year Ceramic Spray Coating
- GTECHNIQ EXO and Crystal Serum Light
- GTECHNIQ Rinse-on Ceramic
- Polish Angel Cosmic Spritz Spraycoat Colour
- Carbon Collective Clear Coat Ceramic Lite