인퓨즈
INFUZE
INFUZE는 강력한 발수성에 특화된 PRO 모델 오버 코팅제로, 건식·습식 모두 시공 가능하며 도장면, 렌즈, 휠에 적용할 수 있습니다. 도장 밀착성이 높은 피막이 강한 발수 보호와 깊은 광택을 동시에 제공합니다. 초고농도 처방으로 비용 효율이 뛰어나며, 반복 시공할수록 발수력이 향상됩니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 최고 수준의 발수 성능
- 강한 밀착 피막으로 깊은 광택
- 건식·습식 겸용 시공 가능
- 초고농도 처방으로 높은 비용 효율
- 반복 시공으로 발수력 향상
- 도장면, 렌즈, 휠 시공 가능
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 세차 후, 권장 메인테넌스 제품으로 하지 처리를 해 주세요.
- 잘 흔든 후, 컷 클로스나 원형 클로스에 본액을 충분히 묻혀 도장면에 도포하세요. 액량이 부족하면 성능이 저하될 수 있으므로 넉넉하게 사용하세요.
- 습식 시공 시에는 클로스를 적당히 적셔 꽉 짠 후 본액을 적량 분사하여 도장면에 도포해 주세요.
- 별도의 건조된 클로스로 잉여분을 닦아 내세요.
- 여름에는 약 5분, 겨울에는 약 10분 동안 건조시킨 후 물에 노출하세요.
INFUZE is a PRO-grade over-coating product engineered for maximum water-beading performance, usable on both dry and wet paint surfaces as well as lenses and wheels. Its high-adhesion film delivers a dual benefit of strong hydrophobic protection and a noticeably deep gloss. The ultra-high-concentration formula offers excellent cost efficiency, and repeated applications build up repellency further until surface saturation is reached.
Key features
- Exceptional water-beading hydrophobic performance
- High-adhesion film for deep gloss
- Dual wet and dry application compatibility
- Ultra-high-concentration formula with low cost per use
- Buildable repellency with repeated applications
- Applicable on paint, lenses, and wheels
Usage
- After washing the vehicle, perform base maintenance using the shop's recommended prep product.
- Shake the bottle well, then apply a generous amount of product onto a cut cloth or round applicator cloth and work it into the paint surface; insufficient product volume may reduce performance.
- For wet application, dampen and wring out the cloth firmly, then spray an appropriate amount of product onto it and work into the surface.
- Wipe off any excess product with a separate dry cloth to finish.
- Allow to dry fully — approximately 5 minutes in summer and 10 minutes in winter — before exposing to water.
다른 이름: 간바스, ganbas, Ganbass INFUZE, 간바스 인퓨즈