GTECHNIQ 스마트 패브릭 I1 V3 희석비 & 사용 가이드

GTECHNIQ 스마트 패브릭 I1 V3 희석비 pH 스펙 카드

Smart Fabric I1 V3

I1 스마트 패브릭 V3는 통기성을 유지하면서 일반 원단을 방수에 가깝게 만들어 청소를 쉽게 해 주는 발수 코팅으로, 수성과 유성 액체를 모두 잘 밀어냅니다. V3 버전에는 곰팡이 방지 기능이 추가되었고 AATCC ISO 5 최고 등급 발수력을 만족합니다. 차량 인테리어에서 약 6~12개월, 컨버터블 루프에서는 최대 약 2년까지 지속됩니다.

브랜드
GTECHNIQ
카테고리
Interior : Fabric Sealants
기본 희석 비율
RTU
실사용 영상
LEXUS LC CV Interior&exterior Full Detail | Car Wash | Car Detail | ASMR | — GLOSS AutoDetail
최종 업데이트
2026-06-18

핵심 특징

희석 비율

용도희석비율
Interior : Fabric Sealants (기본)RTU1:0

사용법

  1. 인테리어 표면은 I2 TriClean으로 사전 세정합니다.
  2. 외부 표면은 심한 오염에 W5 시트러스 올퍼퍼스 클리너 원액을, 가벼운 오염에는 물과 5:1 희석해 사용합니다.
  3. 도포 전 세척 표면을 완전히 건조시킵니다. 좋은 건조 조건에서 48시간이 이상적이며, 원단 함수율이 15% 미만이어야 합니다.
  4. 사용 전 잘 흔들고 장갑을 착용합니다.
  5. 5°C 이상의 통풍이 잘 되는 곳에서 도포합니다.
  6. 직사광선을 피합니다.
  7. 약 15cm 거리에서 고르게 분무해 원단이 충분히 적셔지도록 합니다.
  8. 일단 마른 후에는 추가 도포가 발리지 않으므로 한 번에 꼼꼼히 도포합니다.
  9. 주변 재질에 튄 오버스프레이는 MF1 ZeroR 천으로 즉시 닦아내고, 원단의 잉여 제품도 MF1으로 닦아냅니다.
  10. 24시간 건조 후 최대 성능이 발휘됩니다.
  11. 서늘하고 건조한 곳에 보관합니다.
  12. 개봉 후 12개월 이내에 사용합니다.

I1 Smart Fabric V3 is a breathable fabric protectant that turns ordinary fabrics water-resistant and easier to clean by repelling water- and oil-based liquids. V3 adds anti-mold and anti-mildew chemistry and reaches a top-tier AATCC ISO 5 water repellency rating. Typical durability is about 6 to 12 months on car interiors and up to about 2 years on convertible roofs.

Key features

  • Anti-mold and anti-mildew chemistry
  • AATCC ISO 5 water repellency rating
  • Breathable and durable
  • Color-safe per-fibre coating
  • Protects against water-based stains
  • Repels water- and oil-based liquids
  • About 6 to 12 months on interiors; up to about 2 years on convertible roofs
  • Maintains performance after a 40-degree wash cycle
  • Fabric protection coating (v3)
  • Interior 6–12 mo / convertible 2–3 yr
  • 99.9% anti-bacterial, anti-mould

Usage

  1. For interior surfaces, prep with I2 TriClean.
  2. For exterior surfaces, use neat W5 Citrus All Purpose Cleaner on dirty areas, or dilute 5:1 with water for lighter soiling.
  3. Make sure cleaned surfaces are fully dry before applying I1; ideally 48 hours of good drying conditions, since fabric moisture must be under 15 percent.
  4. Shake well before use and wear gloves.
  5. Apply at 5 degrees Celsius or above in a ventilated area.
  6. Use out of direct sunlight.
  7. Spray evenly from about 15cm to fully saturate the fabric.
  8. Apply thoroughly in one pass since dried I1 will repel a second coat.
  9. Wipe up any overspray on adjacent substrates with an MF1 ZeroR cloth, and remove fabric overage with an MF1.
  10. Allow 24 hours of drying for full effect.
  11. Store in a cool, dry place.
  12. Use within 12 months of opening.

다른 이름: 지테크닉, G-technique, g techniq, I1, I1 V3, I1v3, Gtechniq I1, Gtechniq I1 V3, Smart Fabric, Smart Fabric V3, 지테크닉 I1, 지테크닉 I1 V3, 스마트 패브릭, 스마트 패브릭 V3, 아이원 V3

View in English

출처

관련 제품

GTECHNIQ의 다른 제품

같은 카테고리(Fabric Sealants) 제품

더 보기