GTECHNIQ C0 에어로 코트 희석비 & 사용 가이드

GTECHNIQ C0 에어로 코트 희석비 pH 스펙 카드

C0 Aero Coat

C0 에어로 코트는 표면에 이물질이 잘 달라붙지 않도록 설계된 세라믹 코팅으로, 본래 레이스카용으로 개발되었으며 일반 차량에서는 최대 약 2년까지 지속됩니다. 우수한 광택과 약 110도 접촉각의 발수 성능, 6H 수준의 스월 내성을 페인트와 젤코트 위에서 발휘합니다. 단독으로 사용하거나 다른 Gtechniq 영구 코팅의 탑코트로 적층할 수 있습니다.

브랜드
GTECHNIQ
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-06-18

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 사용 전 잘 흔들고 직사광선을 피해 시공합니다.
  2. 작업 중에는 장갑을 착용합니다.
  3. 동봉된 AP2 울트라 소프트 폼 어플리케이터 패드에 제품을 묻혀줍니다.
  4. 뚜껑을 닫아 한쪽에 두며, 손에 오래 들고 있으면 조기 경화될 수 있어 주의합니다.
  5. 큰 패널 한 면 또는 작은 패널 여러 개를 한 번에 작업합니다.
  6. 2~3분 후 MF1 ZeroR 천으로 잔여물을 제거하고, MF6 헤이즈 버스터나 다른 MF1으로 한 번 더 버핑합니다.
  7. 천에 코팅이 부분 경화되지 않도록 자주 깨끗한 천으로 교체합니다.
  8. 잔여물이 완전히 경화되었다면 해당 부위를 폴리싱한 뒤 코팅을 다시 도포합니다.
  9. 작업 직후 마이크로파이버 천을 물에 담가 빠르게 세척하고 건조해 결정화를 막습니다.
  10. 차량을 외부에 노출하기 전 12시간 동안 경화시킵니다.
  11. 서늘하고 건조한 장소에 보관합니다.
  12. 개봉 후 3개월 이내에 사용합니다.

C0 Aero Coat is a ceramic coating built to limit how easily contaminants stick to surfaces, originally designed for race cars and rated for up to about 2 years on road cars. It delivers strong gloss, water beading at around a 110 degree contact angle, and 6H swirl resistance on paint or gel coat. Use it on its own or as a topcoat over other Gtechniq permanent paint protection products.

Key features

  • Strong anti-adhesion of contaminants
  • Hydrophobic water beading
  • Suited to race and track cars
  • Usable as standalone or topcoat
  • 2-year durability
  • 6H, 110° contact angle

Usage

  1. Shake the bottle well and apply out of direct sunlight.
  2. Wear gloves throughout the application.
  3. Dab product onto the supplied AP2 Ultra Soft Foam Filled Microfibre applicator pad.
  4. Replace the cap and set the bottle aside, since holding it warms the product and speeds curing.
  5. Work one large panel or several smaller panels at a time.
  6. Wait 2 to 3 minutes, then remove residue with an MF1 ZeroR cloth and follow up with an MF6 Haze Buster or another MF1.
  7. Rotate cloths quickly so the coating does not partially cure into the fabric.
  8. If residue cures fully, polish the area and reapply the coating.
  9. Immediately after finishing, soak microfibres in water and wash and dry them right away to prevent crystallisation.
  10. Allow the coating to cure for 12 hours before exposing the car to the elements.
  11. Store in a cool, dry place.
  12. Use within 3 months of opening.

다른 이름: 지테크닉, G-technique, g techniq, C0, Gtechniq C0, Aero Coat, 지테크닉 C0, 에어로 코트, C0 에어로

View in English

출처

관련 제품

GTECHNIQ의 다른 제품

같은 카테고리(Coating) 제품

더 보기