GTECHNIQ W7 타르 앤 글루 리무버 희석비 & 사용 가이드

GTECHNIQ W7 타르 앤 글루 리무버 희석비 pH 스펙 카드

W7 Tar and Glue Remover

W7 타르 앤 글루 리무버는 도로 타르, 아스팔트, 접착제 잔여물, 나무 수액 같은 강한 오염을 분해하는 용제 기반 클리너입니다. Gtechniq 코팅 차량과 일반 차량 모두에 안전하며, 도장이나 클리어코트를 손상시키지 않고 단단히 굳은 얼룩을 녹여냅니다. 아세톤이나 연마 도구와 달리 마감을 해치지 않으면서 오염을 제거합니다.

브랜드
GTECHNIQ
카테고리
Exterior : Remover
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Remover (기본)RTU1:0

사용법

  1. 사용 전 잘 흔들고 장갑을 착용합니다.
  2. 직사광선을 피해 사용합니다.
  3. MF1 ZeroR 천에 분무한 뒤 오염 부위를 부드럽게 닦아냅니다.
  4. 1~2분간 작용시킵니다.
  5. 헹군 뒤 필요 시 반복합니다.
  6. 중요: 플라스틱, 데칼, 고무, 비닐과의 접촉을 피하고 오버스프레이는 즉시 닦습니다. PPF, 스마트 리페어, 랩핑 차량에는 사용하지 않습니다.
  7. 서늘하고 건조한 곳에 보관하고 개봉 후 12개월 이내에 사용합니다.

W7 Tar and Glue Remover is a solvent-based cleaner formulated to lift road tar, asphalt, adhesive residue, and tree sap from vehicle surfaces. It is safe on Gtechniq-coated and uncoated cars and dissolves stubborn deposits without attacking paint or clear coats. Unlike acetone or abrasive tools, W7 lifts contaminants without compromising the finish.

Key features

  • Removes tar and adhesive easily
  • Safe over Gtechniq coatings
  • Solvent-based cleaning
  • Safe on paint and clear coat

Usage

  1. Shake well before use and wear gloves.
  2. Use out of direct sunlight.
  3. Spray onto an MF1 ZeroR cloth and gently wipe the affected area.
  4. Allow it to dwell for 1 to 2 minutes.
  5. Rinse and repeat if necessary.
  6. Important: avoid contact with plastics, decals, rubber, or vinyl, and wipe overspray immediately. Not for PPF, smart repairs, or wrapped vehicles.
  7. Store in a cool, dry place and use within 12 months of opening.

다른 이름: 지테크닉, G-technique, g techniq, W7, Gtechniq W7, W7 Tar Remover, 지테크닉 W7, W7 타르 리무버, 타르 앤 글루 리무버

View in English

출처

관련 제품

GTECHNIQ의 다른 제품

같은 카테고리(Remover) 제품

더 보기