브리지 왁스
BREEZY WAX
도장면에 강하게 밀착되어 표면을 평탄화하고 오버 코팅 성능을 극대화하는 고밀착 과학 왁스입니다. 누구나 어떤 도장에도 쉽게 시공할 수 있는 스트레스 없는 시공성이 특징이며, 오버 코팅 전 베이스 피막으로 사용하는 것이 주목적이지만 단독 시공도 가능합니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Coating
핵심 특징
- 높은 밀착·침투력으로 도장면에 결합
- 뛰어난 시공성 — 누구나 얼룩 없이 시공 가능
- 도장 표면의 극도의 평탄화 효과
- 오버 코팅 성능 극대화 (특히 HAZE, ZELL과 궁합)
- 경화계 코팅 시공이 어려운 손상 도장에 대한 최선의 보호막으로 활용 가능
- 단독 시공도 가능
사용법
- 세차 후 필요에 따라 REBOOT 시리즈나 PM-LIGHT로 하지 처리를 진행합니다.
- 도장면에 물기가 없는 것을 확인한 후, 컷 클로스·원형 클로스 또는 마이크로파이버 클로스에 적당량을 덜어 도장면에 부드럽게 펴 바릅니다. 클로스에 가볍게 물을 뿌리면 더 쉽게 펴 바를 수 있습니다.
- 도포가 완료되면 리버서블 맥스나 이치고짱 등 부드러운 클로스로 잉여분을 닦아냅니다. 이후 오버 코팅제를 사용할 경우 이 단계에서 겹쳐 시공합니다.
A high-adhesion, easy-to-apply scientific wax that bonds strongly into the paint surface, smoothing the finish and improving the performance of over-applied coating agents. Designed for stress-free application by any user on any paint, its primary purpose is to serve as a base layer that boosts the effectiveness of a subsequent over-coating product, though it can also be used standalone.
Key features
- High adhesion penetrates into paint surface
- Excellent spreadability — no patchiness for any user
- Extreme paint surface flattening effect
- Boosts performance of over-applied coatings (especially HAZE, ZELL)
- Suitable as base layer for damaged paint where hard coatings cannot be applied
- Can be applied standalone
Usage
- After washing, perform any necessary paint preparation using REBOOT series or PM-LIGHT, then rinse.
- Confirm there is no water droplets on the paint surface, then apply a small amount of wax using a cut cloth, round cloth, or microfiber cloth and gently work it into the surface. A light mist of water on the cloth can ease spreading.
- Once application is complete, wipe off the excess with a soft cloth such as the Reversible-MAX or Ichigo-chan. If applying an over-coating product afterward, apply it on top at this stage.
다른 이름: 간바스, ganbas, Ganbass BREEZY WAX, ブリージーワックス, 간바스 브리지 왁스, 간바스 BREEZY WAX