servFaces 에어로 페인트 코팅 희석비 & 사용 가이드

servFaces 에어로 페인트 코팅 희석비 pH 스펙 카드

Aero Paint Coating

에어로 페인트 코팅은 항공기 도장면을 위해 개발된 투명하고 내구성 높은 코팅입니다. 경화 후에는 긁힘, 오염, 산성, 염수, 기계적 충격으로부터 오래 보호하며 최대 1,090°C의 열에도 견딥니다.

브랜드
servFaces
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 도포 전 표면을 깨끗이 세정하고 유분을 모두 제거합니다.
  2. 매끈한 표면에는 어플리케이터로 바르고, 거칠고 흡수성 있는 표면에는 분사하거나 롤러로 바릅니다.
  3. 약 1~2분 반응 후 마이크로파이버 천으로 잔여물을 닦거나 폴리싱합니다.
  4. 도포 후 최소 18~24시간 동안 오염과 수분을 피해 표면을 보호합니다.
  5. 완전 경화는 온도와 습도(30~80% RH, 10~35°C)에 따라 약 6~8일 정도 소요됩니다.

Aero Paint Coating is a clear, highly resistant coating developed for aircraft painted surfaces. After curing it gives long-lasting protection against scratches, dirt, acid, salt water, and mechanical stress, and stays heat resistant up to 1,090°C.

Key features

  • For aircraft painted surfaces
  • Heat resistant up to 1,090°C
  • Long-lasting scratch- and dirt-resistant layer
  • Resists acids, salt water, weathering after curing
  • Self-healing thermoelastic film
  • Clear finish with added surface hardness
  • Dust-dry within about 120 minutes

Usage

  1. Clean the surface fully and remove all grease before applying.
  2. Apply with an applicator on smooth surfaces, or spray or roll onto rough, absorptive substrates.
  3. After about 1 to 2 minutes of reaction, wipe or polish off any excess with a microfiber cloth.
  4. Keep the treated surface away from dirt and moisture for at least 18 to 24 hours.
  5. Allow roughly 6 to 8 days for full cure, varying with temperature and humidity (30 to 80% RH, 10 to 35°C).

다른 이름: serv, 서브페이스, 서브, servFaces Aero Paint Coating, SF Aero Paint Coating, APC, servFaces APC, SF APC, 서브페이시스 에어로 페인트 코팅, 서브페이시스 APC, SF10048

View in English

출처

관련 제품

servFaces의 다른 제품

같은 카테고리(Coating) 제품

더 보기