에프제로
FZERO
FZERO는 경화계 코팅제나 오버 코팅제와 달리, 마찰을 가하면서 표면에 정착시키는 시공 방식의 불소계 수지 코팅제입니다. 연마제가 미배합되어 경화계 코팅이 불가능한 손상·저밀도 블랙 도장 차량에 주로 사용되며, 연마기를 활용한 마무리 시공 단계에서의 핵심 아이템입니다. BP-MIX 등과 병용 시 프로 수준의 극한 광택 마감을 실현합니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 마찰로 정착시키는 불소계 수지 코팅제
- 연마제 미배합으로 민감하고 저밀도인 도장에 안전
- 경화계 코팅이 불가능한 도장에 필수 제품
- 손 연마 및 연마기 모두 사용 가능
- 특히 블랙 도장에서 탁월한 광택 발현
- 잉여분은 클로스로 닦거나 물 세차로 제거
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 세차 후 REBOOT 시리즈로 스케일 및 철분 등을 제거하는 하지 처리를 반드시 실시합니다.
- 손 연마의 경우: 손 연마 스펀지 또는 스펀지에 클로스를 감은 것에 제품을 적셔 도장면에 세로·가로 격자 방향으로 고르게 연마합니다.
- 잉여분을 클로스로 닦아내거나 물 세차로 제거하고, 원하는 경우 HAZE 등의 오버 코팅제를 더해 이중 피막으로 마무리합니다.
- 연마기 사용의 경우: 우레탄 버프에 적량을 적셔 도장 밀도에 맞는 강도와 가압으로 고르게 도포한 후 닦아내거나 세차로 제거합니다.
FZERO is a fluorine-based resin coating agent applied by rubbing friction into the surface, rather than a cured or over-coating product. It contains no abrasive and is intended for use on paint that cannot accept cured coatings — particularly damaged or low-density black paint on used vehicles — as well as for machine-polishing finishing passes. It delivers extreme gloss and is a core tool for professional-grade polishing finishes in combination with products like BP-MIX.
Key features
- Fluorine-based resin coating applied by rubbing
- No abrasive — safe for sensitive and low-density paint
- Essential for paint that cannot accept cured coatings
- Compatible with both hand polishing and machine polisher
- Delivers extreme gloss, especially on dark paint
- Residue removed by cloth wiping or rinsing with water
Usage
- After washing, perform surface preparation using the REBOOT series to remove scale and iron particles before polishing.
- For hand polishing: apply product to a hand polishing sponge or a cloth-wrapped sponge and spread evenly across the paint, polishing in a grid pattern (vertical then horizontal) to minimize visible polishing marks.
- Wipe off excess with a cloth or rinse with water; optionally apply an over-coat such as HAZE to achieve a double-film finish.
- For machine polishing: saturate a urethane buff with product and apply evenly across the paint, adjusting pressure and speed according to paint density; wipe off or rinse after application.
다른 이름: 간바스, ganbas, Ganbass FZERO, 간바스 FZERO, 간바스 에프제로