EWOCAR 헤비 컷 플러스 사용 가이드

Heavy Cut+ is Ewocar's most aggressive abrasive compound, engineered for maximum cutting speed and rapid defect removal with minimal heat buildup. It outcuts the standard Heavy Cut, making it the go-to choice for severe paint imperfections that demand the fastest correction. Designed for both rotary and dual-action polishers, it cuts aggressively without overheating the paint — safer on sensitive or heat-prone surfaces. Its water-based formula produces virtually zero dust and maintains a long working cycle even at higher machine speeds. Free of silicones and fillers.

Key features

• Ewocar's most aggressive compound — maximum cutting power above standard Heavy Cut
• Extra-strong cutting speed for faster removal of severe defects
• Cuts aggressively without overheating the paint — safe on heat-prone surfaces
• Water-based formula with virtually zero dust and lower heat buildup
• Long working cycle maintained even at higher machine speeds
• Silicone-free and filler-free; compatible with rotary and dual-action polishers

Usage

1. Ensure the paint surface is clean, dry, and free of contaminants before starting.
2. Apply a moderate amount of Heavy Cut+ to a heavy-cut foam pad or wool pad suited for intensive correction.
3. Set the polisher to a low speed and spread the compound evenly across the section. Heavy Cut+ can be used at higher machine speeds — keep passes controlled to avoid excess heat even though the formula is engineered to minimize heat buildup.
4. Work the section in overlapping passes with firm pressure until severe defects are removed. The water-based formula stays workable through extended cycles without drying out.
5. Wipe off residue with a clean microfiber cloth, then follow up with a finishing compound (e.g., Fine Cut or One Cut) to achieve the final high-gloss result.