헤비 커렉팅 컴파운드
Heavy Correcting Compound
아담스 헤비 커렉팅 컴파운드는 알루미늄 옥사이드와 연마제를 배합한 수성 디미니싱 어브레이시브 기술 기반의 강력 절삭 컴파운드입니다. 클리어코트, 싱글스테이지, 래커 도장면에서 심한 스월, 버퍼 자국, 산화, 얼룩과 약 1500방 샌딩 자국까지 제거합니다. 묽은 액상이 연마 과정에서 미세하게 분해되어 헤이즈 없이 마무리되며, 실리콘 무첨가에 VOC 규정을 충족하고 바디샵에서도 안전하게 사용할 수 있습니다.
- 브랜드
- Adam's Polishes
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
핵심 특징
- 알루미늄 옥사이드와 연마제를 배합한 수성 디미니싱 어브레이시브 기술
- 강력 절삭: 깊은 스월, 버퍼 자국, 산화, 얼룩과 약 1500방 샌딩 자국 제거
- 묽은 액상으로 패드 케이킹과 마이크로파이버 막힘 방지
- 분진이 적고 작업 시간이 길며 잔여물이 깔끔하게 닦임
- 실리콘 무첨가, VOC 규정 충족, 바디샵 안전
- 클리어코트·싱글스테이지·래커 도장면에 사용 가능
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 컴파운딩 전에 세차, 철분 제거, 클레이 작업을 먼저 진행하십시오.
- 폼 또는 마이크로파이버 컷팅 패드에 약 4방울을 떨어뜨리고 디테일 스프레이를 한 번 분사해 패드를 적시십시오.
- 약 60cm × 60cm 구역에 컴파운드를 고르게 펴 바르십시오.
- 고속으로 3~5파운드 압력과 약 25% 겹침을 주며 제품이 투명해질 때까지 작업하십시오.
- 깨끗한 마이크로파이버 타월로 잔여물을 닦아내고 보정된 표면을 확인하십시오.
Adam's Heavy Correcting Compound is a heavy-cut paint correction compound built on a water-based Diminishing Abrasive Technology blend of aluminum oxides and polishing agents. It removes heavy swirl marks, buffer halos, oxidation, stains, and roughly 1500-grit sanding marks from clear coat, single-stage, and lacquer finishes. The thin liquid lets the abrasives break down into a fine polish for a haze-free cutting step, and it is silicone-free, VOC-compliant, and body-shop safe.
Key features
- Water-based Diminishing Abrasive Technology blend of aluminum oxides and polishing agents
- Heavy cut: removes deep swirls, buffer halos, oxidation, stains and ~1500-grit sanding marks
- Thin liquid formula resists pad caking and microfiber clogging
- Low-dust with a long working time; residue wipes off cleanly
- Silicone-free, VOC-compliant, and body-shop safe
- Works on clear coat, single-stage, and lacquer finishes
Usage
- Wash, decontaminate, and clay the vehicle before compounding.
- Apply about four drops onto a foam or microfiber cutting pad and prime the pad with a mist of detail spray.
- Spread the compound over a two-foot by two-foot section.
- Work at high speed with three to five pounds of pressure and about 25% overlap until the product turns clear.
- Wipe residue off with a clean microfiber towel and inspect the corrected surface.
다른 이름: ap, adams, adam's, adams-polish, 아담스, 아담스 폴리시, 아담스 폴리쉬, Adam's Heavy Correcting Compound, Adam's Polishes Heavy Correcting Compound, Adam's HCC, HCC, 아담스 헤비 커렉팅 컴파운드, 아담스 폴리시 헤비 커렉팅 컴파운드
View in English