3D Car Care ACA 520 피니싱 폴리시 희석비 & 사용 가이드

3D Car Care ACA 520 피니싱 폴리시 희석비 pH 스펙 카드

ACA 520 Finishing Polish

알파 세라믹 알루미나 초미세 연마재를 사용하여 컴파운드 작업 후 도장면을 정리하고 홀로그램 없는 고광택 마감을 만들기 위한 피니싱 폴리시입니다. 필러와 실리콘이 없어 모든 도장 종류와 색상, 바디샵 환경에 사용 가능합니다. 부드러운 점도로 마지막 단계에서 도포와 제거가 수월합니다.

브랜드
3D Car Care
카테고리
Exterior : Polishes
기본 희석 비율
RTU
pH
neutral (8)
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 컷팅 컴파운드로 샌딩 자국을 제거한 뒤 버퍼 속도를 약 600~1200 RPM으로 설정합니다.
  2. 피니싱 폼 패드에 약 60x60cm 정도 작업할 만큼의 ACA 520을 도포합니다.
  3. 패드를 표면에 평평하게 유지하며 천천히 겹치는 동작으로 홀로그램과 스월이 사라질 때까지 폴리싱합니다.
  4. 남은 잔여물은 깨끗한 마이크로파이버로 닦아 마감된 도장면을 드러냅니다.

A finishing polish that uses Alpha Ceramic Alumina ultra-fine abrasives to refine paint after compounding and produce a high-gloss, hologram-free surface. The filler-free, silicone-free formula is intended for all paint types and colors and is body-shop compatible. Smooth consistency supports easy spreading and wipe-off at the final correction stage.

Key features

  • Alpha Ceramic Alumina ultra-fine abrasive
  • Filler-free and silicone-free, body-shop compatible
  • Works on all paint types and colors
  • Hologram-free high-gloss finish
  • Easy spread and wipe-off
  • Made in the USA

Usage

  1. After removing sanding marks with a cutting compound, set the buffer to a moderate speed around 600 to 1200 RPM.
  2. Apply enough ACA 520 to a finishing foam pad to work an area roughly 2 by 2 feet.
  3. Polish with slow overlapping passes, keeping the pad flat, until holograms and swirls disappear.
  4. Wipe any remaining residue with a clean microfiber cloth to reveal the corrected finish.

다른 이름: 3D, 3D Car Care ACA 520 Finishing Polish, 3D ACA 520 Finishing Polish, ACA 520, 3D Car Care ACA 520, 3D ACA 520, 3D ACA 520 피니싱 폴리시, 520OZ8

View in English

출처

관련 제품

3D Car Care의 다른 제품

같은 카테고리(Polishes) 제품

더 보기