Dr. Beasley's NSP 150 사용 가이드

Dr. Beasley's NSP 150 희석비 pH 스펙 카드

NSP 150은 1.5마이크론 마이크로스피어 연마재를 사용하는 완전 무기질 헤비 컷 나노 서페이스 프라이머로, 깊은 스크래치와 심각한 도장 결함을 신속하게 제거합니다. 실리콘 오일과 잔여물이 없는 나노겔 캐리어는 동시에 도장 위에 세라믹 코팅 기반을 형성하여, 나노코팅 시공 전 IPA 패널 와이프 단계를 생략할 수 있습니다.

브랜드
Dr. Beasley's
카테고리
Exterior : Polishes
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-07-10

작용 방식

  • 유성(석유계) 용제 — 타르·기름때를 녹이며, 도장면에 오래 두지 않는 것이 좋습니다.
  • 용제 기반 — 유기 용제가 주로 쓰인 제품입니다. 실내·플라스틱에는 환기와 시험 도포를 권합니다.

공개 성분

성분CAS역할
C12-C14 Isoalkanes68551-19-9용제
Dipropylene glycol monomethyl ether34590-94-8용제
Naphtha (petroleum) hydrotreated heavy64742-48-9용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 1.5마이크론 마이크로스피어 연마재로 강력한 연마 보정
  • 깊은 스크래치 및 심각한 도장 결함 제거
  • 도장면에 세라믹 코팅 기반 형성
  • 실리콘 오일 및 유기 잔여물 제로
  • IPA 또는 패널 와이프 불필요
  • 균일한 연마재 분산을 위한 나노겔 캐리어

사용법

  1. 세차, 토탈 디콘 디컨타미네이션, 클레이 바 처리 순서로 차량을 준비하고 틈새 및 민감 부위를 마스킹합니다.
  2. 평탄한 패널의 테스트 구역에 마스킹하고, 강한 조명 아래 도장 결함의 심각도를 확인합니다.
  3. 필요한 최소한의 NSP와 패드 조합으로 저~중속에서 5~7 섹션 패스를 시공합니다.
  4. 결과가 만족스러우면 덜 공격적인 NSP 등급으로 넘어가 NSP 45로 마무리하고, 건식 마이크로파이버 타월로 패널을 두 번 닦습니다.
  5. 결과가 부족하면 더 공격적인 등급으로 추가 패스를 진행한 후 NSP 45로 마무리합니다.
  6. 완료된 패널을 건식 마이크로파이버 타월로 닦고, IPA 와이프 없이 바로 세라믹 코팅을 시공합니다.

NSP 150 is a fully inorganic heavy-cut nano surface primer using 1.5-micron microsphere abrasives to quickly eliminate deep scratches and severe paint defects. Its nanogel carrier, free of silicone oils and residue, simultaneously builds a ceramic coating foundation on the paint, eliminating the need for an IPA panel-wipe before nanocoating application.

Key features

  • 1.5-micron microsphere abrasives for heavy-cut correction
  • Removes deep scratches and severe paint defects
  • Builds ceramic coating foundation on paint
  • Zero silicone oils or organic residue
  • No IPA or panel-wipe step required
  • Nanogel carrier for even abrasive distribution

Usage

  1. Prep the vehicle: wash, decontaminate with Total Decon, clay-bar the surface, and tape off crevices and sensitive areas.
  2. Tape off a test section on a flat panel and inspect paint defects under strong lighting to gauge severity.
  3. Apply 5–7 section passes at low-to-medium machine speed with the least aggressive NSP and pad combination needed.
  4. Re-inspect; if results are satisfactory, move to the next less aggressive NSP grade and finish with NSP 45, then wipe the panel twice with a dry microfiber towel.
  5. If results are insufficient, apply more passes with a more aggressive grade, then work back down to NSP 45.
  6. Wipe all completed panels with a dry microfiber towel and proceed to ceramic coating — no IPA wipe or wait time required.

다른 이름: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's NSP 150, NSP150, 닥터 비즐리 NSP 150

View in English

출처

  • Dr. Beasley's 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)
  • 최종 검토: 2026-07-10

관련 제품

Dr. Beasley's의 다른 제품

  • Tiger Grip Orange Nitrile Gloves
  • Matte Paint Coating
  • Buff and Shine Uro-Tec Soft White Finishing Foam Grip Pad
  • Carpet Stone
  • Matte Decon
  • Terry Applicator

같은 카테고리(Polishes) 제품

  • Ganbass Level 3 Water-Soluble Polish
  • Angelwax Regenerate
  • Car Gods Titans Pure Compound
  • Infinity Wax Medium Cut Polish 2400
  • POLYTOP Schleifknete blau
  • Ganbass Level 2

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)