Yum Wheels
얌 휠즈
Yum Wheels is a non-acidic, pH-neutral combined wheel cleaner and iron fallout remover that is safe to use on most painted, polished, powder-coated, clear-coated and chrome wheel surfaces, and can also be applied directly to paintwork to dissolve stubborn iron particles. Its thick gel-like consistency holds the product on vertical wheel faces for excellent dwell time and cleaning contact, while a visible colour-changing reaction confirms that metallic contaminants are actively being broken down within about a minute of application.
얌 휠즈는 비산성·pH 중성의 휠 클리너 겸 아이언 폴아웃 리무버로, 대부분의 도장·폴리시·분체도장·클리어 코팅·크롬 휠 표면에 안전하며 도장면의 완고한 철분 입자 제거에도 직접 사용할 수 있습니다. 젤 타입의 점도가 휠 수직면에 밀착되어 충분한 접촉 시간과 세정력을 발휘하며, 도포 후 약 1분 이내에 금속성 오염물이 분해되고 있음을 알려 주는 눈에 띄는 색 변화가 나타납니다.
- Brand
- Yum Cars
- Categories
- Exterior : Tire&Wheel Cleaner
- pH
- neutral
Key features
- Non-acidic, pH-neutral formula
- Safe on painted, polished, powder-coated, clear-coated and chrome wheels
- Wheel cleaner and iron fallout remover in a single product
- Thick gel clings to vertical surfaces without running off
- Visible colour-changing reaction within about a minute
- Can also tackle iron and brake-dust contamination on paintwork
- Use at full strength; available in two sizes
Usage
- Ensure the wheel surface is cool to the touch before starting — never apply straight after driving.
- Pre-rinse the wheels with a pressure washer to remove loose dirt before applying Yum Wheels.
- Spray Yum Wheels generously onto the wheel surface at full strength — do not dilute.
- For stubborn deposits, agitate gently with ultra-soft detailing brushes or Wheel Woolies.
- Rinse thoroughly before the product dries on any surface; never allow it to dry on a wheel finish.
- When applying to paintwork, avoid direct sunlight.
핵심 특징
- 비산성·pH 중성 포뮬러
- 도장·폴리시·분체도장·클리어 코팅·크롬 휠에 안전
- 휠 클리너와 아이언 폴아웃 리무버 통합 제품
- 흘러내리지 않고 수직면에 밀착하는 젤 점도
- 약 1분 이내 눈에 띄는 색상 변화 반응
- 도장면의 철분·브레이크 분진 오염 제거에도 사용 가능
- 원액 전용, 두 가지 용량 제공
사용법
- 사용 전 휠 표면이 손으로 만졌을 때 충분히 식은 상태인지 확인합니다. 주행 직후에는 절대 사용하지 않습니다.
- 얌 휠즈 도포 전 고압 세척기로 휠을 먼저 헹궈 가벼운 오염물을 제거합니다.
- 원액 상태(희석 금지)로 얌 휠즈를 휠 표면에 충분히 분사합니다.
- 완고한 오염 부위는 초연질 디테일링 브러시나 휠 울리로 부드럽게 문질러 줍니다.
- 표면에서 제품이 마르기 전에 깨끗이 헹굽니다. 어떤 휠 마감재에도 마르도록 두어서는 안 됩니다.
- 도장면에 사용할 때는 직사광선을 피합니다.