3D Car Care Yellow Degreaser Dilution Ratios & User Guide

3D Car Care Yellow Degreaser dilution ratio and pH specification chart

옐로우 디그리저

3D Car Care Yellow Degreaser — Exterior : Tire&Wheel Cleaner, alkali pH, base dilution 1:4~1:20. At 1:4, mix about 250 ml of 3D Car Care Yellow Degreaser per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/3d-car-care/yellow-degreaser

3D Car Care 옐로우 디그리저 — Exterior : Tire&Wheel Cleaner, pH alkali, 기본 희석 1:4~1:20. 1:4 기준 물 1L당 3D Car Care 옐로우 디그리저 약 250ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/3d-car-care/yellow-degreaser

A highly concentrated, non-acid alkaline cleaner formulated to degrease and clean all wheel types, tires, and wheel-well areas. It dissolves oily brake dust and breaks down older silicone-based tire dressings while being described as safe on chrome, polished aluminum, painted, and plastic wheels. The formula is presented as non-toxic and biodegradable.

모든 종류의 휠과 타이어, 휠하우스를 탈지하고 세정하기 위한 고농축 논산성 알칼리 세정제입니다. 유성 브레이크 더스트를 녹이고 기존에 도포된 실리콘 기반 타이어 드레싱도 분해하며, 크롬·연마 알루미늄·도장·플라스틱 휠에도 안전한 것으로 안내됩니다. 무독성·생분해성으로 표기된 포뮬라입니다.

Brand
3D Car Care
Categories
Exterior : Tire&Wheel Cleaner
Primary dilution
1:4~1:20
pH
alkali (11)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Exterior : Tire&Wheel Cleaner (primary)1:4~1:201:4-20

Usage

  1. Dilute Yellow Degreaser to suit the job: roughly 1:20 for light, 1:10 for medium, or 1:4 for heavy soil, and do not use it neat.
  2. Spray the diluted solution generously onto the wheel, tire, and wheel-well surfaces.
  3. Allow at least about 30 seconds of dwell time, then agitate stubborn dirt with a wheel or tire brush.
  4. Rinse thoroughly with clean water before the product dries on the surface.

핵심 특징

  • 논산성 강력 탈지제
  • 휠·타이어·휠하우스 세정
  • 유성 브레이크 더스트와 기존 실리콘 타이어 드레싱 제거
  • 화이트월과 레터링을 밝게 하는 데 도움
  • 크롬·연마 알루미늄 포함 모든 휠 타입에 안전한 것으로 안내
  • 무독성, 생분해성

사용법

  1. 옐로우 디그리저를 작업 강도에 맞게 희석합니다. 가벼운 오염은 약 1:20, 중간 오염은 1:10, 심한 오염은 1:4 정도이며 원액 그대로 사용하지 않습니다.
  2. 희석한 용액을 휠, 타이어, 휠하우스 표면에 충분히 분사합니다.
  3. 약 30초 이상 반응 시간을 주고, 완고한 오염은 휠 또는 타이어 브러시로 문질러줍니다.
  4. 표면에서 제품이 마르기 전에 깨끗한 물로 충분히 헹궈냅니다.

Also known as: 3D, 3D Car Care Yellow Degreaser, 3D Yellow Degreaser, YD, 3D Car Care YD, 3D YD, 3D 카 케어 옐로우 디그리저, 106OZ16

한국어로 보기

Sources

Related products

More from 3D Car Care

More Tire&Wheel Cleaner products

Explore more