Yum Foam+
얌 폼 플러스
Yum Foam+ is a spray-applied resin ceramic sealant that combines protective polymers with fluoropolymers to deliver instant gloss, slickness and water repellency across the entire exterior in one application. Once rinsed, the remaining coating resists everyday contamination along with most acidic and alkaline solutions, and the UV protection it provides is designed to last up to about 8 to 12 weeks. The ultra-concentrated formula is diluted at roughly 1:9 in a foam cannon, allowing a single bottle to produce several litres of ready-to-use sealant.
얌 폼 플러스는 분사형 수지 세라믹 실란트로, 보호 폴리머와 불소 폴리머를 결합해 한 번의 도포로 외장 전체에 즉각적인 광택, 미끄러움, 발수력을 부여합니다. 린스 후 남은 코팅은 일상적인 오염과 대부분의 산·알칼리성 용액에 저항하며, UV 차단 효과는 약 8~12주 지속되도록 설계되어 있습니다. 초고농축 포뮬러를 폼캐논에서 약 1:9 비율로 희석하면 한 병으로 여러 리터의 즉시 사용 가능한 실란트를 만들 수 있습니다.
- Brand
- Yum Cars
- Categories
- Exterior : Foam
- Primary dilution
- 1:9~1:19
Key features
- Spray-applied resin ceramic sealant
- Instant hydrophobic protection, gloss and slickness
- Durability of about 8 to 12 weeks
- UV protection and resistance to most acids and alkalis
- Water repellency increases with each rinse pass
- Ultra-concentrated: dilutes roughly 1:9 for large yield per bottle
- Safe on paint, glass, plastic, wheels and brake calipers
Dilution
- Exterior : Foam — 1:9~1:19 (1:9-19) (primary)
Usage
- Dilute Foam+ at roughly 1:9 in a foam cannon — one bottle of product topped up with about 4.5 litres of water gives roughly 5 litres of ready-to-use sealant.
- For a lighter maintenance top-up, mix about 50 ml of Foam+ with approximately 950 ml of water in the foam cannon.
- Apply the foam across all exterior surfaces including paint, glass, plastic, wheels and brake calipers.
- Begin rinsing — the formula is designed so that each pass increases water repellency.
- The same dilution ratios work in a spray bottle with a short-barrel gun for targeted or even coverage on smaller areas.
핵심 특징
- 분사형 수지 세라믹 실런트
- 즉각적인 발수 보호, 광택, 미끄러움
- 약 8~12주 지속 내구성
- UV 차단 및 대부분의 산·알칼리 저항성
- 헹굴수록 발수력이 향상되는 더블 린스 포뮬러
- 초고농축: 약 1:9 희석으로 한 병에서 대량 제조 가능
- 도장면, 유리, 플라스틱, 휠, 브레이크 캘리퍼에 안전
사용법
- 폼캐논에 Foam+를 약 1:9로 희석합니다. 제품 한 병에 물 약 4.5리터를 더하면 약 5리터의 즉시 사용 가능한 실란트가 만들어집니다.
- 가벼운 유지 보수 시에는 폼캐논에 Foam+ 약 50ml와 물 약 950ml를 혼합합니다.
- 도장면, 유리, 플라스틱, 휠, 브레이크 캘리퍼 등 외장 전체에 폼을 도포합니다.
- 헹굼을 시작합니다. 포뮬러 특성상 헹굴수록 발수력이 높아집니다.
- 동일한 희석 비율을 짧은 총신 건 조합의 스프레이 보틀에 사용하면 좁은 부위나 고른 도포에 효과적입니다.