Ultra Coat Tar & Glue Remover Dilution Ratios & User Guide
타르 & 접착제 제거제
Ultra Coat Tar & Glue Remover — Exterior : Remover. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/ultra-coat/tar-and-glue-remover
Ultra Coat 타르 & 접착제 제거제 — Exterior : Remover. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/ultra-coat/tar-and-glue-remover
Tar & Glue Remover is a slow-evaporating solvent designed for removing tar deposits, adhesive residues, and sticker remnants before polishing or ceramic coating services. Its extended working time allows thorough dissolution of stubborn contamination while remaining safe on paint, coatings, wheels, and plastics.
Tar & Glue Remover는 폴리싱 또는 세라믹 코팅 시공 전에 타르 침착물, 접착제 잔여물, 스티커 자국을 제거하기 위한 서서히 증발하는 용제입니다. 긴 작업 시간 덕분에 완고한 오염물을 충분히 용해할 수 있으며, 도장, 코팅, 휠, 플라스틱에 안전합니다.
- Brand
- Ultra Coat
- Categories
- Exterior : Remover
- Primary dilution
- RTU
- Last updated
- 2026-06-18
How it works
- Glycol ether solvent — Dissolves oil film and traffic film; can soften some plastics and rubber.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| 2-Butoxyethanol (ethylene glycol monobutyl ether) | 111-76-2 | Solvent |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Removes tar, adhesives, and sticker residues
- Slow evaporation extends working time
- Safe on paint, coatings, wheels, and plastics
- Suitable for pre-polishing and pre-coating prep
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Remover (primary) | RTU | 1:0 |
Usage
- Apply the product from the bottom of the surface working upward.
- Allow the product to dwell for 1–2 minutes to dissolve contamination.
- Rinse off with a pressure washer, then wash the area with a shampoo.
- Repeat steps 1–3 if any contamination remains.
핵심 특징
- 타르, 접착제, 스티커 잔여물 제거
- 서서히 증발하여 충분한 작업 시간 확보
- 도장, 코팅, 휠, 플라스틱에 안전
- 폴리싱 및 코팅 시공 전 전처리에 적합
사용법
- 표면 아래에서 위쪽 방향으로 제품을 도포합니다.
- 1~2분간 방치하여 오염물이 충분히 용해되도록 합니다.
- 고압 세척기로 헹군 후 샴푸로 표면을 세척합니다.
- 오염이 남아 있으면 1~3단계를 반복합니다.
Also known as: 울트라, 울트라코트, ultra, Ultra Coat Tar & Glue Remover, ULTRACOAT Tar & Glue Remover, TGR, 울트라코트 타르 & 접착제 제거제, 울트라코트 TGR
Sources
Related products
More from Ultra Coat
More Remover products
- GLOSSBRO BLOOD IRON EXTREME
- POLYTOP Flugrostentferner 2000
- Auto Glym Intensive Tar Remover
- Shiny Garage Spot Off
- Sam's Detailing Tar & Glue Remover
- Shine Supply Spot Rinse