Rain Drop Tornado Vortex
레인 드롭 토네이도 보텍스
소프트99 · soft · 소프트 · Soft99 Rain Drop Tornado Vortex · 소프트99 레인 드롭 토네이도 보텍스
Rain Drop Tornado Vortex is the evolved Rain Drop aerosol coating featuring the newly developed Tornado Vortex Head (TV Head) that distributes product in a swirling pattern for faster and more even coverage. A spray-and-wipe application activates the G-RAS shield, providing 5 months of deep gloss and hydrophobic protection on the body and 3 months of rain repellence on glass. When empty, the TV Head can be removed and the cartridge replaced with a large-volume refill.
레인 드롭 토네이도 보텍스는 새롭게 개발된 토네이도 보텍스 헤드(TV 헤드)를 탑재한 레인 드롭 에어로졸 코팅의 진화형으로, 소용돌이 분사 방식으로 더 빠르고 균일한 도포를 실현합니다. 스프레이 후 닦기 한 번으로 G-RAS 실드 효과가 활성화되어 차체에 5개월의 깊은 광택과 발수 보호, 유리에 3개월의 빗물 흘림 효과를 제공합니다. 내용물이 소진되면 TV 헤드를 분리하고 대용량 리필 카트리지로 교체 가능합니다.
- Brand
- Soft99
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Tornado Vortex Head (TV Head) for faster, more even swirling spray pattern
- 5 months of gloss and hydrophobic protection on painted surfaces
- 3 months of rain repellence on glass
- G-RAS shield activated by spray-and-wipe application
- Replaceable cartridge refill system — remove TV Head and swap body
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Wash and rinse the vehicle thoroughly; keep a clean, dry microfiber cloth ready.
- With the nozzle locked, shake the can 20 times, then unlock and spray evenly onto the wet surface at about 2 seconds per square meter.
- Apply to glass before the body; for grilles or wheels, spray onto the cloth and wipe the surface.
- Immediately wipe up with a clean, dry microfiber cloth, refolding as needed to use a fresh side. If unevenness occurs, re-wipe with a well-wrung damp cloth.
- After application, avoid wetting for 1 hour in summer or 24 hours in winter to improve coating performance.
핵심 특징
- 토네이도 보텍스 헤드(TV 헤드)로 더 빠르고 균일한 소용돌이 분사
- 도장면에 5개월 광택 및 발수 보호
- 유리에 3개월 빗물 흘림 효과
- 스프레이 후 닦기로 G-RAS 실드 활성화
- TV 헤드 분리 후 카트리지 리필 교체 가능
사용법
- 차량을 깨끗이 세차하고 충분히 헹궈냅니다. 깨끗하고 건조한 마이크로파이버 수건을 준비합니다.
- 노즐을 잠근 상태에서 캔을 20회 흔든 후 잠금을 해제하고 젖은 표면에 약 1㎡당 2초씩 고르게 분사합니다.
- 유리에 먼저 도포한 후 차체에 적용합니다. 그릴이나 휠에는 천에 분사한 후 표면을 닦아줍니다.
- 깨끗하고 건조한 마이크로파이버 수건으로 즉시 닦아내고, 필요 시 수건을 접어 새 면을 사용합니다. 얼룩이 생기면 잘 짠 수건으로 다시 닦아냅니다.
- 도포 후 여름에는 1시간, 겨울에는 24시간 동안 수분이 닿지 않도록 하여 코팅 성능을 향상시킵니다.