Soft99 Surface Smoother User Guide

Soft99 Surface Smoother dilution ratio and pH specification chart

서피스 스무더

Soft99 Surface Smoother — Exterior : Remover. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/soft99/surface-smoother

Soft99 서피스 스무더 — Exterior : Remover. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/soft99/surface-smoother

A clay bar designed to remove embedded surface contaminants such as iron particles, tar, road grime, and industrial fallout from painted surfaces. Used with a lubricant, it glides across the paint to lift deposits that regular washing cannot remove, leaving a smooth base before waxing or coating.

도장 면에 박힌 철분 입자, 타르, 도로 오염물, 산업 분진 등을 제거하도록 설계된 클레이 바입니다. 윤활제와 함께 사용하면 일반 세차로는 제거되지 않는 이물질을 부드럽게 들어내어, 왁스나 코팅 시공 전 매끄러운 도장 면을 만들어 줍니다.

Brand
Soft99
Categories
Exterior : Remover
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-08

Key features

Usage

  1. Wash the car thoroughly to remove sand and loose dirt before use.
  2. Apply a lubricant (water or shampoo solution) to the panel, then rub the clay bar lightly across the wet surface.
  3. If the clay surface becomes dirty, fold it to expose a clean section and continue.
  4. Rinse the panel and dry with a clean towel after claying.

핵심 특징

  • 철분, 타르, 피치, 산업 분진 제거
  • 합성 수지 및 연마제 함유
  • 왁스 또는 코팅 시공 전 도장 면 전처리
  • 스크래치 방지를 위해 윤활제와 함께 사용

사용법

  1. 모래나 이물질을 제거하기 위해 차량을 충분히 세차합니다.
  2. 패널에 윤활제(물 또는 샴푸 희석액)를 뿌린 후, 클레이 바를 적신 표면 위에서 가볍게 문지릅니다.
  3. 클레이 면이 오염되면 접어서 깨끗한 면을 노출시킨 후 계속 사용합니다.
  4. 클레이 작업 후 패널을 물로 헹구고 깨끗한 수건으로 닦아냅니다.

Also known as: 소프트99, soft, 소프트, Soft99 Surface Smoother, SS, 소프트99 서피스 스무더

한국어로 보기

Sources

Related products

More from Soft99

More Remover products

Explore more