H-9 Dual Layer Glass Coat
H-9 듀얼 레이어 글라스 코트
소프트99 · soft · 소프트 · Soft99 H-9 Dual Layer Glass Coat · 소프트99 H-9 듀얼 레이어 글라스 코트 · H-9
H-9 Dual Layer Glass Coat is an advanced two-stage paint coating that combines a primer base coat and a hard glass top coat to achieve 9H hardness using the latest Japanese coating technology. Its exceptional water repellency prevents contaminant adhesion while delivering a deep, long-lasting gloss.
H-9 듀얼 레이어 글라스 코트는 최신 일본 코팅 기술을 활용하여 프라이머 베이스 코트와 하드 글라스 탑 코트를 결합해 9H 경도를 실현하는 고급 2단계 도장 코팅제입니다. 뛰어난 발수성으로 오염물 부착을 방지하고 깊고 오래 지속되는 광택을 제공합니다.
- Brand
- Soft99
- Categories
- Exterior : Coating
Key features
- Dual-layer system: primer base coat + hard glass top coat
- 9H hardness
- Superior water repellency prevents contaminant adhesion
- Deep, long-lasting gloss
- Extra hydrophobic glass-layer formula
Usage
- Before applying, wash the paintwork thoroughly, then perform iron decontamination, polishing, and degreasing.
- Work panel by panel; ensure the car body is cool before starting.
- Insert the flow-limiter into the base coat bottle neck, apply a moderate amount to the sponge, and spread in a crisscross pattern to avoid gaps.
- Wipe off the base coat with the included towel before it dries; in cold conditions, immediately repeat the apply-and-wipe step once.
- Shake the top coat thoroughly, insert the flow-limiter, then apply to a fresh sponge 20–30 minutes after wiping off the base coat, following the same panel order.
- Allow the top coat to dry (about 1 minute in summer, 2–5 minutes in winter), then wipe off with a clean towel.
- After completing all panels, leave the vehicle to cure in a dry place for 12 hours.
핵심 특징
- 2단계 시스템: 프라이머 베이스 코트 + 하드 글라스 탑 코트
- 9H 경도
- 뛰어난 발수성으로 오염물 부착 방지
- 깊고 오래 지속되는 광택
- 초발수성 유리막 포뮬러
사용법
- 도포 전, 도장면을 세차한 뒤 철분 제거, 폴리싱, 탈지 작업을 완료합니다.
- 패널별로 작업하며, 차체가 뜨거울 경우 충분히 식힌 후 시작합니다.
- 베이스 코트 병 입구에 유량 제한기를 끼우고 스펀지에 적당량을 묻혀 격자 방향으로 빈틈없이 도포합니다.
- 베이스 코트가 건조되기 전에 포함된 타월로 닦아냅니다. 추운 환경에서는 즉시 도포·닦기를 한 번 더 반복합니다.
- 탑 코트를 충분히 흔들고 유량 제한기를 끼운 뒤, 베이스 코트를 닦아낸 후 20~30분이 지나면 새 스펀지에 묻혀 동일한 패널 순서로 도포합니다.
- 탑 코트가 건조되면(여름 약 1분, 겨울 2~5분) 깨끗한 타월로 닦아냅니다.
- 모든 패널 작업 완료 후 건조한 장소에서 12시간 경화시킵니다.