Scoat v2
스코트 v2
Scoat v2 is a fluoropolymer- and SiO2-based hand-applied coating that provides strong hydrophobic properties and a slick, glossy finish. It works both as an independent protective coating and as a top-up layer over existing ceramic coatings, and its quick, no-fuss application makes it a popular wax alternative. The product requires no extended curing time — simply apply and the car is ready to go.
Scoat v2는 플루오로폴리머와 SiO2를 기반으로 한 손 도포형 코팅으로, 강력한 발수력과 매끄럽고 광택 있는 마감을 제공합니다. 단독 보호 코팅으로도, 기존 세라믹 코팅 위에 덧바르는 리로드 레이어로도 활용할 수 있으며, 간편한 도포 방법 덕분에 왁스를 대체하는 제품으로 인기가 높습니다. 별도의 장시간 경화가 필요 없어 도포 후 바로 차량을 사용할 수 있습니다.
- Brand
- Ultra Coat
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Fluoropolymer and SiO2-based protective coating
- Strong hydrophobic effect and slick surface feel
- Works as standalone coating or ceramic coating reload
- No curing time required
- Quick and easy hand application
- Replaces traditional waxes
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Ensure the surface is completely clean, decontaminated, and free of old coatings, waxes, and glazes.
- Machine-polish the surface if any scratches, swirl marks, or holograms are present.
- Thoroughly degrease the surface with Ultracoat Wipe It! or IPA; a second degreasing pass is recommended.
- Apply Scoat v2 in good lighting, out of direct sunlight, using a clean microfibre cloth.
- For enhanced protection, apply a second layer immediately after the first.
핵심 특징
- 플루오로폴리머·SiO2 기반 보호 코팅
- 강력한 발수 효과와 매끄러운 표면감
- 단독 코팅 또는 세라믹 코팅 리로드로 활용
- 별도 경화 시간 불필요
- 빠르고 간편한 손 도포
- 기존 왁스를 대체하는 제품
사용법
- 표면이 완전히 세정되고, 기존 코팅·왁스·광택제가 제거되어 있는지 확인합니다.
- 스크래치, 소용돌이 흠집, 홀로그램이 있는 경우 머신 폴리싱을 먼저 진행합니다.
- 울트라코트 Wipe It! 또는 IPA로 표면을 충분히 탈지하며, 두 번 반복하는 것을 권장합니다.
- 직사광선을 피하고 조명이 충분한 곳에서 깨끗한 마이크로파이버 천으로 Scoat v2를 도포합니다.
- 보호 성능 향상을 위해 첫 번째 레이어 도포 직후 두 번째 레이어를 추가합니다.
Also known as: 울트라, 울트라코트, ultra, ULTRACOAT Scoat v2, Ultra Coat Scoat v2, UC Scoat v2, Scoat V2, 울트라코트 스코트 v2
한국어로 보기
Sources