Optimum Gloss-Coat Ceramic Coating
옵티멈 글로스-코트 세라믹 코팅
Optimum Gloss-Coat is a consumer-friendly SiO2 ceramic coating that forms a chemically bonded, hydrophobic, and glossy protective shell over properly prepared paint. The included foam applicator block makes installation approachable for DIY enthusiasts while delivering results consistent with the broader Opti-Coat system.
제대로 준비된 도장면에 화학적으로 결합해 발수성과 광택을 갖춘 보호막을 형성하는 컨슈머용 SiO2 세라믹 코팅입니다. 포함된 폼 어플리케이터로 DIY 시공이 가능하면서도 Opti-Coat 시스템 수준의 내구성을 제공합니다.
- Brand
- OPTI-COAT
- Categories
- Exterior : Coating
Key features
- Consumer-grade SiO2 ceramic coating
- Chemically bonded hydrophobic protection
- Foam block applicator included
- DIY-friendly installation
- Opti-Coat ecosystem compatible
Usage
- Thoroughly decontaminate and polish the paint, then wipe with a panel-prep solution before coating.
- Add a few drops of coating onto the supplied applicator block, keeping fingers away from the suede or foam face.
- Spread the coating across one panel at a time using straight or crosshatch passes for even coverage.
- After the coating has properly flashed, level any high spots with a clean plush microfiber, then keep the surface dry for at least 24 hours.
핵심 특징
- 컨슈머용 SiO2 세라믹 코팅
- 화학 결합 발수 보호
- 폼 블록 어플리케이터 포함
- DIY 시공 용이
- Opti-Coat 시스템 호환
사용법
- 도장면을 디컨태미네이션·폴리싱한 뒤 패널 프렙 용액으로 깨끗이 닦아 시공 준비를 마칩니다.
- 제공된 어플리케이터 블록에 코팅 용액을 몇 방울 올립니다. 스웨이드나 폼 면은 손으로 만지지 않도록 합니다.
- 패널 하나씩 직선 또는 크로스해치 방향으로 코팅을 고르게 도포합니다.
- 코팅이 충분히 플래시된 후 깨끗한 극세사 타월로 하이스폿을 고르게 펴주고, 24시간 이상 물에 닿지 않게 합니다.