servFaces Aero Paint Coating Dilution Ratios & User Guide

에어로 페인트 코팅
servFaces Aero Paint Coating — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/servfaces/aero-paint-coating
servFaces 에어로 페인트 코팅 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/servfaces/aero-paint-coating
Aero Paint Coating is a clear, highly resistant coating developed for aircraft painted surfaces. After curing it gives long-lasting protection against scratches, dirt, acid, salt water, and mechanical stress, and stays heat resistant up to 1,090°C.
에어로 페인트 코팅은 항공기 도장면을 위해 개발된 투명하고 내구성 높은 코팅입니다. 경화 후에는 긁힘, 오염, 산성, 염수, 기계적 충격으로부터 오래 보호하며 최대 1,090°C의 열에도 견딥니다.
- Brand
- servFaces
- Categories
- Exterior : Coating
- Primary dilution
- RTU
- Where to buy
- Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
- Last updated
- 2026-06-02
Key features
- For aircraft painted surfaces
- Heat resistant up to 1,090°C
- Long-lasting scratch- and dirt-resistant layer
- Resists acids, salt water, weathering after curing
- Self-healing thermoelastic film
- Clear finish with added surface hardness
- Dust-dry within about 120 minutes
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Coating (primary) | RTU | 1:0 |
Usage
- Clean the surface fully and remove all grease before applying.
- Apply with an applicator on smooth surfaces, or spray or roll onto rough, absorptive substrates.
- After about 1 to 2 minutes of reaction, wipe or polish off any excess with a microfiber cloth.
- Keep the treated surface away from dirt and moisture for at least 18 to 24 hours.
- Allow roughly 6 to 8 days for full cure, varying with temperature and humidity (30 to 80% RH, 10 to 35°C).
핵심 특징
- 항공기 도장면용
- 최대 1,090°C 내열
- 오래가는 긁힘 및 오염 저항막
- 경화 후 산성, 염수, 풍화 저항
- 자가복원 열탄성 피막
- 표면 경도를 더한 투명 마감
- 약 120분 내 표면 건조
사용법
- 도포 전 표면을 깨끗이 세정하고 유분을 모두 제거합니다.
- 매끈한 표면에는 어플리케이터로 바르고, 거칠고 흡수성 있는 표면에는 분사하거나 롤러로 바릅니다.
- 약 1~2분 반응 후 마이크로파이버 천으로 잔여물을 닦거나 폴리싱합니다.
- 도포 후 최소 18~24시간 동안 오염과 수분을 피해 표면을 보호합니다.
- 완전 경화는 온도와 습도(30~80% RH, 10~35°C)에 따라 약 6~8일 정도 소요됩니다.
Also known as: serv, 서브페이스, 서브, servFaces Aero Paint Coating, SF Aero Paint Coating, APC, servFaces APC, SF APC, 서브페이시스 에어로 페인트 코팅, 서브페이시스 APC, SF10048
Sources
Related products
More from servFaces
- Acid Wheel Cleaner // AWC-S3010
- Hydro Ceramic Shampoo
- Premium Applicator Sponges
- Textil Strong
- Rims Cleaner
- Aero Window Coating
More Coating products
- Nasiol MetalCoat F2
- Ethos Car Care RESIST
- Nihachi Pro F Silver
- 3D Car Care Carnauba Wax
- CarPro DQ GO
- Adam's Polishes Adam's UV Ceramic Paint Coating