PVD-STD
PVD-STD is a specially developed compound for the Mastermind next-generation polishing system, optimized for low-density or softer paint coatings as the primary cutting compound in the initial polishing stage. It features a water-soluble formula that eliminates gloss-enhancing fillers, allowing accurate real-time assessment of polishing progress. Abrasive particles of varying hardness and size are uniformly blended so that extended polishing gradually breaks them down, making the compound suitable for both cutting and finishing passes.
PVD-STD는 '차세대 연마 시스템 Mastermind' 전용으로 개발된 컴파운드로, 저밀도(부드러운) 도장에 대한 초기 연마 단계의 메인 컴파운드입니다. 광택을 속이는 성분 없이 수용성 포뮬러로 제조되어 연마 중 실제 상태를 정확히 확인할 수 있습니다. 경도와 입경이 다른 연마 입자를 균일하게 배합하여 오래 연마할수록 입자가 미세해지므로 마무리 연마에도 사용 가능합니다.
- Brand
- PROVIDE
- Categories
- Exterior : Polishes
Key features
- Designed for Mastermind polishing system
- Primary cutting compound for low-density or soft paint
- Water-soluble — no fillers or gloss-masking agents
- Multi-particle formula: particles break down for finishing use
- Used with long wool buff for initial cutting
Usage
- Use PVD-STD with the Mastermind polishing system and a long wool buff for the initial cutting stage on low-density paint.
- Apply an appropriate amount of compound to the buff and begin polishing at the recommended machine settings.
- For finishing, switch to a urethane buff and use a smaller amount of compound than during the initial cutting stage.
핵심 특징
- Mastermind 연마 시스템 전용
- 저밀도/부드러운 도장 초기 연마용 메인 컴파운드
- 수용성 — 광택 속임 성분 없음
- 복합 연마 입자: 연마 시간이 길수록 입자 미세화
- 롱 울 버프와 함께 초기 연마에 사용
사용법
- 저밀도 도장의 초기 연마 단계에서 Mastermind 시스템과 롱 울 버프를 사용합니다.
- 버프에 적당량의 컴파운드를 도포하고 권장 기계 설정으로 연마를 시작합니다.
- 마무리 연마 시에는 우레탄 버프로 교체하고 초기 연마보다 소량을 사용합니다.
Also known as: 프로바이드, PROVIDE PVD-STD, PVD-STD 특수 컴파운드, 프로바이드 PVD-STD, PVD-STD 컴파운드
한국어로 보기
Sources