Fine Cut
파인 컷
Fine Cut is a finishing polishing compound formulated to remove micro-scratches and holograms from painted surfaces, correcting P3000-level defects to achieve a flawless finish. It is ideal for use before applying protective coatings or waxes. Water-based and free from solvents and fillers, it operates with high efficiency and minimal dusting.
파인 컷은 도장면에서 미세 스크래치와 홀로그램을 제거하도록 설계된 마감용 폴리싱 컴파운드로, P3000 수준의 결함을 교정하여 완벽한 마감을 구현합니다. 보호 코팅이나 왁스 적용 전 사용하기에 이상적입니다. 수성 기반으로 용제와 충전제가 없으며, 높은 효율과 최소한의 분진으로 작동합니다.
- Brand
- FX Protect
- Categories
- Exterior : Polishes
Key features
- Removes micro-scratches and holograms
- Removes P3000 sanding marks
- Perfect pre-coating surface preparation
- High efficiency with low dust
- Contains aluminum oxide abrasive
- Water-based, solvent-free formula
- Silicone, filler, and wax free
Usage
- Work in a shaded area on a cool surface and thoroughly clean the surface beforehand.
- Test the product on a less visible area before full application.
- Shake the product, then apply a few drops onto a polishing pad.
- Spread over a small section using a machine polisher at appropriate speed settings.
- Polish until the desired result is achieved, then wipe off excess with a microfiber cloth.
- Repeat the process if necessary.
핵심 특징
- 미세 스크래치 및 홀로그램 제거
- P3000 샌딩 자국 제거
- 코팅 전 완벽한 표면 준비
- 낮은 분진으로 높은 효율
- 산화알루미늄 연마제 함유
- 수성, 무용제 포뮬라
- 실리콘, 충전제, 왁스 미함유
사용법
- 그늘진 곳에서 차가운 표면 위에 작업하고 사전에 표면을 깨끗하게 세정하십시오.
- 전체 적용 전에 눈에 덜 띄는 부위에서 제품을 테스트하십시오.
- 제품을 흔든 후 폴리싱 패드에 몇 방울 도포하십시오.
- 적절한 회전수로 설정된 폴리셔를 사용하여 작은 구역에 고르게 펴 바르십시오.
- 원하는 결과가 나올 때까지 폴리싱한 후 마이크로파이버 천으로 잔여물을 닦아내십시오.
- 필요시 과정을 반복하십시오.
Also known as: fx, 에프엑스, 에프엑스 프로텍트, FX Protect Fine Cut, FX Fine Cut, FXP Fine Cut, FC, 에프엑스 프로텍트 파인 컷
한국어로 보기
Sources