PVD-A06
PVD-A06 is a specialized chemical cleaner formulated to visualize and remove raised water-scale deposits and stubborn black soiling from car body paint, emblems, and trim edges without abrasive polishing. The product decomposes black grime and scale through chemical action, allowing residue to be lifted off with a cloth wipe, making it ideal for surface preparation on coated and uncoated vehicles alike. Biodegradable and containing only a trace amount of surfactant, it is a professional-grade product that should be used with protective eyewear and gloves.
PVD-A06는 도장 면에 부착된 볼록한 스케일 자국과 엠블럼 주변 및 몰딩 가장자리의 완고한 검은 오염물을 연마 없이 화학적으로 분해하여 클로스 닦아내기만으로 제거할 수 있는 전문용 특수 세정제입니다. 코팅 시공 여부에 관계없이 모든 도장 차량의 하지 처리나 유지관리에 적합하며, 생분해성이 우수하고 극소량의 계면활성제만 배합되어 도장 면 손상을 최소화합니다. 보호 안경 및 장갑 착용이 필요한 업무용 제품입니다.
- Brand
- PROVIDE
- Categories
- Exterior : Remover
- Primary dilution
- RTU
- pH
- acid
Key features
- Removes raised scale deposits without abrasive polishing
- Decomposes and lifts stubborn black grime from emblems and trim edges
- Works on coated and uncoated paint surfaces
- Effective surface preparation before coating application
- Biodegradable formula with minimal surfactant content
- Also removes stubborn insect debris from front bumpers
- Professional-grade chemical requiring protective gear
Dilution
- Exterior : Remover — RTU (1:0) (primary)
Usage
- Pre-rinse the target surface with water to remove loose sand and mud.
- If the surface is covered by wax or oily residue, remove it first as the chemical cannot react through oil-based contamination.
- Dry the surface to maximize the chemical's effectiveness.
- Put on protective eyewear and nitrile gloves, then apply a few drops of PVD-A06 to a detailing brush and work it onto the target area (do not spray — prevent mist dispersion).
- After a few seconds, apply again and gently brush away the decomposed soiling, then immediately rinse with water. Repeat steps 4–5 if residue remains.
핵심 특징
- 연마 없이 볼록한 스케일 자국 제거
- 엠블럼 및 몰딩 가장자리 완고한 검은 오염물 분해·제거
- 코팅 도장 및 미코팅 도장 모두 사용 가능
- 코팅 전 하지 처리에 효과적
- 극소량의 계면활성제만 함유한 생분해성 포뮬러
- 프런트 범퍼 등의 완고한 벌레 부착물 제거에도 효과적
- 보호구 착용이 필요한 전문용 케미컬
사용법
- 도포 대상 면의 모래와 흙을 미리 물로 씻어 제거합니다.
- 오염물이 왁스 등 유지 성분으로 덮여 있는 경우 케미컬이 반응하지 못하므로 사전에 제거합니다.
- 보다 효과적인 반응을 위해 도포 면의 수분을 제거합니다.
- 보호 안경과 니트릴 장갑을 착용한 후, 디테일링 브러시에 PVD-A06를 수 방울 묻혀 대상 면에 도포합니다 (스프레이 금지 — 미스트 비산 방지).
- 수 초 후 재차 도포하고 분해된 오염물을 브러시로 부드럽게 제거한 뒤 즉시 물로 씻어냅니다. 제거되지 않은 경우 4~5단계를 반복합니다.
Also known as: 프로바이드, PROVIDE PVD-A06, PVD-A06 스케일 제거제, 프로바이드 PVD-A06
한국어로 보기
Sources