Wind Coat
윈드 코트
Wind Coat is a single-component silicone-based coating designed exclusively for windshield glass. It provides strong water-repellency that keeps the glass clean and makes routine maintenance noticeably easier. With proper application it can last over a year on the windshield, with typical durability of three to six months under normal use.
Wind Coat는 앞유리 전용으로 설계된 1액 실리콘 타입 코팅제입니다. 강력한 발수력으로 유리 표면을 깨끗하게 유지하며 일상적인 관리를 훨씬 편리하게 해줍니다. 적절히 시공하면 앞유리 기준 1년 이상 지속된 사례도 있으며, 일반적인 사용 환경에서는 약 3~6개월의 내구성을 발휘합니다.
- Brand
- PROVIDE
- Categories
- Exterior : Glass Sealant
Key features
- Windshield glass exclusive single-component coating
- Silicone-based strong water-repellency
- Reduces dirt and scale adhesion
- Easy application with tissue paper
- Durability up to 1 year on front windshield
Usage
- Thoroughly remove all dirt, oil film, and contaminants from the glass surface before application.
- Ensure the glass surface is completely dry; any remaining moisture will weaken adhesion.
- Apply Wind Coat by pressing a folded tissue gently against the applicator tip, then spread evenly across the glass in horizontal and vertical strokes.
- Wipe off with a clean cotton towel immediately after spreading; slight glare may remain at this point.
- Wait approximately 15 minutes, then wipe the surface with a clean microfiber cloth that has been dampened and wrung out firmly; optionally finish with a dry cotton towel for a cleaner result.
핵심 특징
- 앞유리 전용 1액 코팅제
- 실리콘 타입 강력 발수
- 오염물 및 물때 고착 억제
- 티슈로 간편 도포 가능
- 앞유리 기준 최대 1년 내구성
사용법
- 시공 전에 유리 표면의 오염물, 유막, 이물질을 완전히 제거합니다.
- 유리 표면을 완전히 건조시킵니다. 수분이 남아 있으면 밀착력이 저하됩니다.
- 4겹으로 접은 티슈를 용기 끝에 살짝 눌러 약액을 적신 후, 유리 전면에 가로·세로 방향으로 고르게 도포합니다.
- 도포 직후 깨끗한 면 타월로 닦아냅니다. 이 단계에서는 약간의 번들거림이 남을 수 있습니다.
- 약 15분 방치 후, 물에 적셔 꽉 짠 깨끗한 마이크로파이버 클로스로 닦아내어 마무리합니다. 마지막에 마른 면 타월로 건식 닦기를 하면 더욱 깔끔합니다.
Also known as: 프로바이드, PROVIDE Wind Coat, 프로바이드 윈드 코트, WIND COAT
한국어로 보기
Sources