NO.4
NO.4 is a professional-grade scale-removal chemical designed to make raised water-scale deposits on car body paintwork visible and remove them through cloth-wiping without abrasive polishing. Applied to the surface, it reacts within seconds to bring scale residue to the surface as white deposits that can be wiped away cleanly, making it essential for periodic body maintenance on coated and uncoated vehicles. Biodegradable with minimal surfactant content, it is a professional product requiring protective eyewear and gloves.
NO.4는 자동차 도장 면에 부착된 볼록한 스케일 자국을 가시화하여 연마 없이 클로스 닦아내기만으로 제거할 수 있는 전문용 스케일 제거 케미컬입니다. 도장 면에 도포하면 수 초 내에 반응하여 스케일을 흰색으로 부상시키며, 이를 닦아내는 것만으로 제거가 완료되어 코팅 도장 차량과 미코팅 차량 모두의 정기 유지관리에 필수적입니다. 생분해성이 우수하며 계면활성제를 극소량만 배합한 전문용 제품으로 보호구 착용이 필요합니다.
- Brand
- PROVIDE
- Categories
- Exterior : Remover
- Primary dilution
- RTU
- pH
- acid
Key features
- Makes invisible raised scale deposits visible on paint surfaces
- Removes scale by cloth wiping without abrasive polishing
- Reacts within seconds to bring scale to the surface
- Effective on coated and uncoated vehicle paint
- Useful for black soiling around emblems
- Also removes stubborn insect deposits from bumpers
- Biodegradable with minimal surfactant content
Dilution
- Exterior : Remover — RTU (1:0) (primary)
Usage
- Pre-rinse the target surface with water to remove sand and mud.
- If the surface is coated with wax or oily substances, remove them first as they prevent chemical reaction.
- Dry the target surface (some moisture is acceptable but drier is more effective).
- Wearing protective eyewear and nitrile gloves, dampen a microfiber cloth with water, wring it firmly, apply an adequate amount of NO.4, and wipe across the surface (do not spray — prevent mist dispersion).
- After a few seconds, scale deposits will appear as white residue; do not allow the liquid to dry as droplets on the paint.
- Wipe again with the cloth and check whether the white scale no longer rises — if removal is complete, proceed to rinse.
- After successful removal, rinse thoroughly with water and wipe dry with a clean cloth to finish.
핵심 특징
- 도장 면의 볼록한 스케일 자국을 육안으로 가시화
- 연마 없이 클로스 닦아내기만으로 스케일 제거
- 수 초 내 반응하여 스케일을 표면으로 부상
- 코팅 도장 및 미코팅 도장 모두 사용 가능
- 엠블럼 주변 검은 오염물 제거에도 효과적
- 범퍼의 완고한 벌레 부착물 제거에도 활용
- 극소량의 계면활성제만 함유한 생분해성 포뮬러
사용법
- 도포 대상 면의 모래와 흙을 미리 물로 씻어 제거합니다.
- 왁스 등 유지 성분으로 오염물이 덮여 있으면 미리 제거합니다 (유지 성분이 있으면 케미컬이 반응하지 못합니다).
- 도포 대상 면의 수분을 제거합니다 (수분이 약간 남아 있어도 되지만, 적을수록 효과적입니다).
- 보호 안경과 니트릴 장갑을 착용한 후, 귀 없는 마이크로파이버 클로스를 물로 적셔 단단히 짜낸 뒤 NO.4를 적량 묻혀 대상 면에 도포합니다 (스프레이 금지 — 미스트 비산 방지).
- 수 초 후 스케일이 흰색으로 부상합니다. 액체가 물방울 상태로 보디에 남지 않도록 주의합니다.
- 클로스로 다시 닦아내어 흰색 스케일이 더 이상 부상하지 않으면 제거 완료입니다. 제거되지 않은 경우 4~6단계를 반복합니다.
- 제거 완료 후 물로 충분히 씻어내고, 깨끗한 클로스로 닦아 내어 마무리합니다.
Also known as: 프로바이드, PROVIDE NO.4, NO.4 스케일 제거제, 프로바이드 NO.4, 노포인트4
한국어로 보기
Sources