Nihachi Pro CNT Dilution Liquid Dilution Ratios & User Guide

Nihachi Pro CNT Dilution Liquid dilution ratio and pH specification chart

CNT 희석액

Nihachi Pro CNT Dilution Liquid — Exterior : Coating, base dilution 1:50~1:100. At 1:50, mix about 20 ml of Nihachi Pro CNT Dilution Liquid per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/nihachi-pro/cnt-dilution-liquid

Nihachi Pro CNT 희석액 — Exterior : Coating, 기본 희석 1:50~1:100. 1:50 기준 물 1L당 Nihachi Pro CNT 희석액 약 20ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/nihachi-pro/cnt-dilution-liquid

A single-walled carbon nanotube (CNT) solution designed as a coating additive or final-wipe liquid. When diluted and applied after or alongside a water-based coating, it enhances gloss, improves anti-fouling performance, reduces static charge, and helps smooth airflow over the surface.

단층 카본 나노튜브(CNT)를 배합한 코팅 보조·마무리 용액입니다. 수용성 코팅 시공 시 희석하여 함께 사용하면 광택 향상, 방오성 강화, 대전 방지 효과를 얻을 수 있으며, 공기 흐름을 정돈하는 효과도 기대할 수 있습니다.

Brand
Nihachi Pro
Categories
Exterior : Coating, Exterior : Tire&Wheel Sealant
Primary dilution
1:50~1:100
Last updated
2026-06-08

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)1:50~1:1001:50-100
Exterior : Tire&Wheel Sealant1:101:10

Usage

  1. For coating additive or final wipe-down use: dilute 1 part CNT Dilution Liquid with 50–100 parts purified water.
  2. Wearing protective gloves, mask, and goggles, apply the diluted solution to a cloth or applicator sponge.
  3. Spread evenly over the coated surface during or after the coating application process.
  4. For tyre application: dilute at least 1:10 with purified water, then apply to the tyre surface using an applicator sponge and spread evenly. Note: this treatment provides antistatic benefit, not a gloss finish.
  5. If overapplied, rinse off with water. Always test on a hidden area before full application.

핵심 특징

  • 광택 향상 및 방오성 강화를 위한 단층 카본 나노튜브 포뮬러
  • 코팅 표면의 정전기 발생 억제
  • 코팅제 희석액 또는 마무리 닦기 용도로 활용
  • 타이어에 도포하면 대전 방지 효과
  • 순수(정제수)로 희석 후 사용; 다른 물질과 혼합 금지

사용법

  1. 코팅 보조 또는 마무리 닦기 용도: CNT 희석액 1에 순수 50~100을 혼합합니다.
  2. 보호 장갑·마스크·고글을 착용한 후, 희석액을 클로스 또는 어플리케이터 스펀지에 적당량 묻힙니다.
  3. 코팅 시공 중 또는 시공 후 차체 전면에 고르게 펴 바릅니다.
  4. 타이어 사용 시: 순수로 최소 10배 희석 후 어플리케이터 스펀지에 묻혀 타이어 표면에 고르게 도포합니다. 광택 효과는 없으며, 대전 방지 목적입니다.
  5. 과도하게 도포된 경우 물로 세척합니다. 전체 시공 전 눈에 띄지 않는 부위에서 반드시 테스트하십시오.

Also known as: 니하치, 니하치프로, nihachi, 서일본케미컬, 서일본 케미컬, 서일본케미칼, Nihachi Pro CNT Dilution Liquid, 28pro CNT Dilution Liquid, CNT, Carbon Nanotube Dilution Liquid, CNT希釈液, 니하치 프로 CNT 희석액, 카본 나노튜브 희석액, 28프로 CNT 희석액, NihachiPro CNT, Single-Wall CNT Dilution Liquid

한국어로 보기

Sources

Related products

More from Nihachi Pro

More Coating products

Explore more