Cleansing Toner Acid
클렌징 토너 산성
니하치 프로 · 니하치 · 니하치프로 · nihachi · Nihachi Pro Cleansing Toner Acid · 28pro Cleansing Toner Acid · CLEANSINGTONER Acid · CTA · 酸性CLEANSINGTONER · 니하치 프로 클렌징 토너 산성 · 산성 클렌징 토너 · Cleansing Toner Acidic Ver · 28Pro CTA · Nihachi Cleansing Toner Acid
An acidic (pH 2–3) paint surface pre-treatment agent applied to a wet body after shampooing. Cleanses deep into the micro-pores of paintwork, efficiently removing light water spots, scale, and oily contamination, while reviving water repellency and gloss on coated vehicles.
샴푸 세차 후 젖은 차체에 시공하는 산성(pH 2~3) 도장 전처리제입니다. 도장 표면의 미세 기공 깊숙이 클렌징하여 가벼운 물자국, 스케일, 유분 오염을 효과적으로 제거하고, 코팅 차량의 발수성과 광택을 회복시킵니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Remover
- Primary dilution
- RTU ~ 1:10
- pH
- acid (2.5)
Key features
- Acid pH (2–3) for effective scale and water spot removal
- Cleanses deep into paint micro-pores for thorough surface prep
- Revives water repellency and gloss on coated vehicles
- Suitable for painted surfaces and unpainted resin trim
- Also effective as a post-polish degreaser for coating adhesion
Dilution
- Exterior : Remover — RTU ~ 1:10 (1:0-10) (primary)
Usage
- After shampooing, leave the body wet. Do not dry the surface before application.
- Dilute the product with purified water according to vehicle condition: use undiluted to 5x dilution for heavy contamination, up to 10x for maintenance.
- Spray onto a sponge or cloth and apply panel by panel. Do not allow the product to dry on the surface.
- Rinse each panel thoroughly with water immediately after application.
- Wipe off moisture. For neutralization, optionally follow with the weakly alkaline Cleansing Toner (20x dilution) applied and wiped off.
- Apply protective coating if desired after the surface prep is complete.
핵심 특징
- pH 2~3 산성으로 스케일 및 물자국 효과적 제거
- 도장 미세 기공 깊숙이 클렌징하여 철저한 전처리 가능
- 코팅 차량의 발수성 및 광택 회복
- 도장면 및 미도장 수지 트림에 사용 가능
- 연마 후 탈지 처리로도 활용 가능하여 코팅 밀착력 향상
사용법
- 샴푸 세차 후 차체를 젖은 상태로 유지합니다. 도포 전 건조하지 마세요.
- 차량 상태에 따라 순수로 희석합니다: 오염이 심한 경우 원액~5배 희석, 유지 관리용은 최대 10배 희석.
- 스펀지 또는 클로스에 스프레이하여 패널 단위로 도포합니다. 표면에서 건조되지 않도록 주의하세요.
- 도포 후 즉시 각 패널을 물로 충분히 헹궈냅니다.
- 수분을 닦아냅니다. 중화가 필요한 경우, 약알칼리성 클렌징 토너를 20배 희석하여 도포 후 닦아내는 방법을 권장합니다.
- 전처리 완료 후 필요에 따라 보호 코팅을 시공합니다.