F Silver
F 실버
니하치 · 니하치프로 · nihachi · F Silver 300ml · Nihachi Pro F Silver · 28pro F Silver · 20 Series F Silver · 犠牲被膜復元コーティング F Silver · F SILVER · エフシルバー · 니하치 프로 F 실버 · F 실버 300ml · NihachiPro F Silver · F Silver 4L · Nihachi Pro F Silver 4L · 28pro F Silver 4L · 20 Series F Silver 4L · 犠牲被膜復元コーティング F Silver 4L · F SILVER 4L · エフシルバー 4L · F 실버 4L · 니하치 프로 F 실버 4L · F Silver Bulk · NihachiPro F Silver 4L
F Silver is a sacrificial-film restoration coating in Nihachi Pro's 20-series, formulated as the successor to PG1 Silver with an updated anti-static agent. It delivers high water-repellency, gloss, and antifouling performance, while an anti-static component helps discharge static electricity built up during driving to improve aerodynamic stability. Compatible as an overcoat on wax, other sealants, and cured glass coatings.
F 실버는 니하치 프로 20계열의 희생 피막 복원 코팅으로, PG1 실버의 후계 제품으로 개발되었습니다. 특수 대전 방지제를 배합하여 발수·광택·방오성을 높이며, 주행 중 차체에 축적되는 정전기를 방출해 공기 흐름 안정에도 기여합니다. 왁스, 간이 코팅, 경화형 유리 코팅 위의 오버코팅으로도 사용 가능합니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Coating
Key features
- Sacrificial-film restoration coating in the 20-series F Silver line
- Successor to PG1 Silver with anti-static agent for aerodynamic stability during driving
- Delivers super water-repellency, glass-like gloss, and antifouling performance
- Compatible as an overcoat on wax, simple coatings, and cured glass coatings
- Wet, semi-dry, or dry application methods all supported
- Film durability approx. 3 months; re-application recommended monthly
Usage
- Wash the vehicle and wipe off all moisture.
- Shake the bottle well. Spray a moderate amount onto a clean, slightly damp cloth. For the first panel, use about 5 pumps; for subsequent panels, 1–2 pumps.
- Spread evenly across one panel at a time, working in shade away from direct sunlight.
- Wipe off streaks immediately with a separate clean damp cloth.
- Finish with a dry buff to enhance the final appearance. Work through all panels until the entire vehicle is coated.
핵심 특징
- 20계열 F 실버 라인의 희생 피막 복원 코팅
- PG1 실버 후계 제품 — 대전 방지제 배합으로 주행 중 공기 흐름 안정화
- 초발수·유리 광택·방오 성능 3박자를 모두 갖춘 코팅
- 왁스, 간이 코팅, 경화형 유리 코팅 위 오버코팅 가능
- 습식·반습식·건식 등 다양한 시공 방법 지원
- 피막 지속 약 3개월; 월 1회 이상 재시공 권장
사용법
- 세차 후 물기를 완전히 닦아냅니다.
- 본액을 잘 흔든 뒤, 깨끗하고 물기를 꽉 짠 클로스에 적당량 스프레이합니다. 첫 번째 패널에는 약 5회, 이후 패널에는 1~2회 분사합니다.
- 직사광선을 피한 그늘에서 패널 하나씩 고르게 펴 바릅니다.
- 깨끗한 물기 있는 클로스로 얼룩을 즉시 닦아냅니다.
- 마지막으로 건식 마무리 닦기를 하여 광택을 높입니다. 전체 패널을 완료할 때까지 반복합니다.