No.320 F
니하치 · 니하치프로 · nihachi · Nihachi Pro No.320 F · 28pro No.320 F · N320F · 니하치 프로 No.320 F · No.320 에프 · 28프로 No.320 F · 320F 코팅 · 나노카본 코팅 320F · N°320"F" · No.320F · 320 에프 코팅 · No.320 F 250 · Nihachi Pro No.320 F 250 · 28pro No.320 F 250 · N°320 F 250ml · 320"F" 250ml · 320F 250ml · N320F Retro Spray 250ml · 니하치 프로 No.320 F 250 · No.320 에프 250 · 나노카본 희생피막 복원 코팅 · 삼이공에프 250ml · 320 F 코팅
No.320 F is a patented nano-carbon coating that incorporates a sacrificial film restoration mechanism — it forms a penetrating protective layer rather than a surface film, resisting contamination and allowing easy layer-on-layer recoating. Infused with nano-silver and nano-gold from the Imakire series, it provides aesthetic gloss, anti-static protection, and water-spot reduction without requiring a separate base coating.
No.320 F는 특허 취득 나노카본 코팅제로, 도막 표면에 머무르는 방식이 아닌 침투 피막 형성 방식을 채택한 희생 피막 복원 코팅제입니다. 이마키레 시리즈의 나노 실버와 나노 골드를 배합하여 뛰어난 광택·대전 방지·방오 성능을 발휘하며, 별도의 베이스 코팅 없이도 단독으로 사용 가능합니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Coating
Key features
- Patented sacrificial-film restoration coating — industry-first technology
- Penetrating film type: resists contamination entrapment and supports repeated recoating
- No base coating required — standalone use is sufficient for regular maintenance
- Dual nano-metal (nano-silver + nano-gold) infused for enhanced gloss and anti-static performance
- Anti-static multi-conductive agents reduce dust adhesion and water spotting
- Carbon nanotube structure enhances coating film durability
- Usable as topcoat over existing glass, ceramic, or hard-cure coatings
Usage
- Wash the vehicle and wipe off all moisture.
- Shake the bottle well (approximately 30 times) before use.
- In a shaded area away from direct sunlight, spray an appropriate amount onto a damp, wrung-out microfiber cloth.
- Spread the product evenly over one panel at a time, then wipe off streaks with a clean damp cloth.
- Move to the next panel and repeat until the entire vehicle is coated.
- Finish with a final dry-buff pass for best results.
- Reapply approximately once a month to maintain anti-static and protective performance.
핵심 특징
- 특허 취득 희생 피막 복원 코팅 — 업계 최초 기술
- 침투 피막 형성 방식으로 오염 흡수 억제, 중복 시공 용이
- 베이스 코팅 불필요 — 단독 사용으로 정기 관리 가능
- 나노 실버 + 나노 골드 이중 배합으로 광택 및 대전 방지 성능 향상
- 다종 도전성 소재 + 특수 대전 방지제로 먼지 흡착 및 물자국 저감
- 카본 나노튜브 구조로 코팅 피막 내구성 강화
- 기존 유리·세라믹·경화형 코팅 위에 오버코팅으로도 사용 가능
사용법
- 세차 후 차체의 수분을 완전히 닦아냅니다.
- 사용 전 병을 충분히 흔들어 줍니다(약 30회).
- 직사광선을 피한 그늘진 장소에서 물기를 꽉 짠 마이크로파이버 클로스에 적당량 스프레이합니다.
- 1패널씩 고르게 펴 바른 후, 깨끗한 젖은 클로스로 얼룩을 닦아냅니다.
- 다음 패널로 이동하여 동일한 작업을 반복해 차량 전체를 시공합니다.
- 마지막으로 마른 클로스로 마무리 닦기를 하면 더욱 좋은 결과를 얻을 수 있습니다.
- 대전 방지 및 보호 성능 유지를 위해 약 월 1회 재시공합니다.