Nasiol MetalCoat F2 Dilution Ratios & User Guide

Nasiol MetalCoat F2 dilution ratio and pH specification chart

메탈코트 F2

Nasiol MetalCoat F2 — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/nasiol/metalcoat-f2

Nasiol 메탈코트 F2 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/nasiol/metalcoat-f2

MetalCoat F2 is a spray-on nano ceramic coating that delivers scratch resistance and long-lasting hydrophobic protection to automotive and other vehicle surfaces in a single easy application. The spray-and-buff method makes it accessible to both enthusiasts and professionals while providing up to one year of durability.

메탈코트 F2는 스프레이 방식으로 쉽게 적용할 수 있는 나노 세라믹 코팅으로, 차량 표면에 스크래치 저항성과 강력한 발수 특성을 부여합니다. 간단한 분사 후 버핑만으로 최대 1년의 내구성을 확보할 수 있어 전문가와 일반 사용자 모두에게 적합합니다.

Brand
Nasiol
Categories
Exterior : Coating
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Ensure application temperature is between 5°C and 30°C at ≤50% RH, and work on cool surfaces away from direct sunlight.
  2. Wash the vehicle thoroughly; apply a clay bar if needed, then polish with a silicone-free compound and wash again until all areas are dry.
  3. Wipe down all application surfaces with Nasiol Clean to remove residual contamination, then dry with a lint-free cloth.
  4. Put on the protective nitrile gloves and spray the product onto one square metre (about 20–30 sprays), then buff immediately with a microfiber cloth.
  5. Work in sections no larger than 1 m² at a time.
  6. Keep the coated surface away from sunlight, dust, water, and contaminants during the 24-hour curing period.

핵심 특징

  • 간단한 스프레이 후 버핑 적용
  • 즉각적인 광택과 강력한 발수성
  • 높은 화학 물질 저항성
  • 외장 플라스틱 트림에 안전
  • 최대 12개월 표면 보호

사용법

  1. 시공 온도가 5°C~30°C이고 습도가 50% 이하인지 확인하며, 직사광선을 피해 표면이 충분히 식은 상태에서 작업합니다.
  2. 차량을 깨끗하게 세차하고 필요 시 클레이바를 사용한 후, 실리콘 및 왁스가 없는 컴파운드로 폴리싱 후 다시 세차하여 완전히 건조시킵니다.
  3. 나시올 클린을 사용해 잔여 오염물을 제거한 후 보풀 없는 천으로 건조합니다.
  4. 니트릴 장갑을 착용하고 1m² 당 20~30회 스프레이한 후 마이크로파이버 천으로 즉시 버핑합니다.
  5. 한 번에 1m² 이하 면적씩 나누어 작업합니다.
  6. 코팅 후 24시간 동안 직사광선, 먼지, 물 및 오염물질을 피합니다.

Also known as: 나지올, Nasiol MetalCoat F2, MCF2, Nasiol MCF2, 나시올 메탈코트 F2

한국어로 보기

Sources

Related products

More from Nasiol

More Coating products

Explore more