CarPro DQ GO Dilution Ratios & User Guide
CarPro DQ GO — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/carpro/dq-go
CarPro DQ GO — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/carpro/dq-go
DQ GO is a nano diamond quartz coating reformulated for straightforward consumer application. It raises surface hardness by up to about 5 scale points and incorporates a smoothing fluoropolymer layer that repels contaminants while keeping the finish slick and durable.
DQ GO는 전문가용 나노 다이아몬드 쿼츠 코팅을 일반 사용자도 손쉽게 시공할 수 있도록 재설계한 제품입니다. 불소 중합체 성분이 표면을 매끄럽게 마감하고, 경도를 높여 자외선·화학물질·기계적 마모에 강한 보호층을 형성합니다.
- Brand
- CarPro
- Categories
- Exterior : Coating
- Primary dilution
- RTU
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-08-16
How it works
- Alkoxysilane — Reacts with moisture to bond chemically to the surface.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Solvent naphtha (petroleum), heavy aliphatic | 64742-96-7 | Solvent |
| 3-Aminopropyltriethoxysilane (APTES) | 919-30-2 | Film former |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Nano diamond quartz fusion
- Surface hardness increase up to about 5 points
- Smoothing fluoropolymer layer
- UV resistant
- Chemical and mineral resistant
- Acid and alkali resistant
- Solvent and mechanical wear resistant
- Reduced swirl marks
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Coating (primary) | RTU | 1:0 |
Usage
- Apply DQ GO to a clean, completely dry painted surface.
- Wait about 3–5 minutes for the product to flash at around 24°C, longer in cooler conditions.
- Once the surface feels slightly tacky, buff off gently with a clean microfiber towel.
- For an additional layer, wait about 1 hour and keep the vehicle sheltered for about 48 hours.
핵심 특징
- 나노 다이아몬드 쿼츠 융합
- 표면 경도 약 5포인트 향상
- 불소 중합체 평활층
- 자외선 저항
- 화학물질·광물 저항
- 산성·알칼리성 저항
- 용제·마모 저항
- 스월 마크 저감
사용법
- 깨끗하고 완전히 건조된 도장면에 DQ GO를 도포하세요.
- 약 24°C 기준 약 3–5분간 플래싱을 기다리세요. 기온이 낮을수록 더 오래 기다려야 합니다.
- 표면이 살짝 끈적해지면 마이크로파이버 타월로 부드럽게 닦아내세요.
- 추가 레이어 시공은 약 1시간 후에 하고, 이후 약 48시간 동안 차량을 실내에 보관하세요.
Also known as: 카프로, DQUARTZ GO, Diamond Quartz GO, DQ GO Coating, Nano Diamond Coating, DQ고, 다이아몬드 쿼츠 GO, 나노 다이아몬드 코팅
Sources
Related products
More from CarPro
More Coating products
- Labocosmetica BENEFICIA - Wet coat
- Nasiol MetalCoat F2
- Shine Supply Daddy-O!
- Detail Artist VENUS
- Soft99 Smooth Egg Platinum Liquid
- Armour Detail Supply Wheel Coating