TrimCoat
트림코트
나지올 · Nasiol TrimCoat · Trim Coat · Nasiol Trim Coat · 나시올 트림코트
TrimCoat is a nano ceramic coating formulated to restore and protect exterior and interior plastic, vinyl, and rubber trim on vehicles. It revives the original satin appearance of discolored parts and delivers long-lasting water and oil repellency alongside UV protection against color fading. Suitable for both end users and professionals, application to a mid-size car takes approximately 15 to 20 minutes.
트림코트는 차량 내외부 플라스틱, 비닐, 고무 트림을 복원하고 보호하는 나노 세라믹 코팅입니다. 변색된 부품을 원래의 새틴 외관으로 되살리며 자외선으로 인한 색상 변화를 방지합니다. 지속적인 발수·발유 효과를 제공하며 일반 사용자와 전문가 모두 사용할 수 있습니다.
- Brand
- Nasiol
- Categories
- Interior : Trim Sealants
- Primary dilution
- RTU
Key features
- Restores discolored plastic and rubber trim to original satin appearance
- Water and oil repellent surface protection
- UV protection to prevent color fading
- High scratch resistance
- Applicable to exterior and interior plastic, vinyl, and rubber trim
Dilution
- Interior : Trim Sealants — RTU (1:0) (primary)
Usage
- Ensure ambient temperature is between 5°C and 30°C with relative humidity at or below 50%.
- Prepare the surface using a suitable pre-cleaner to remove residual contamination and improve coating adhesion, then dry with a lint-free microfiber cloth.
- Put on the protective nitrile gloves provided. Shake the product gently before use.
- Open the lid and pour the required amount onto the applicator pad. Keep the lid closed during application.
- Spread the product gently over the surface in a single direction. Work in sections no larger than 1 m² per session.
- Keep coated surfaces away from sunlight, moisture, and contamination for 48 hours. Wait a full 48 hours before any detergent-based washing.
핵심 특징
- 변색된 플라스틱 및 고무 트림을 원래 새틴 외관으로 복원
- 발수·발유 표면 보호
- 색상 변화 방지를 위한 자외선 차단
- 높은 스크래치 내성
- 내외부 플라스틱, 비닐, 고무 트림에 적용 가능
사용법
- 주변 온도가 5°C~30°C 이내이고 상대 습도가 50% 이하인지 확인합니다.
- 전처리 클리너를 사용해 표면의 오염 잔여물을 제거하고 코팅 밀착력을 높인 후 마이크로파이버 천으로 건조합니다.
- 동봉된 니트릴 장갑을 착용하고 사용 전 제품을 살짝 흔들어 줍니다.
- 뚜껑을 열고 필요한 양을 도포 패드에 붓습니다. 작업 중에는 뚜껑을 닫아 두십시오.
- 제품을 한 방향으로 표면 전체에 부드럽게 펴 바릅니다. 한 번에 1 m² 이하의 구역씩 작업합니다.
- 코팅 후 48시간 동안 직사광선, 수분, 오염 물질에 노출되지 않도록 합니다. 세제 기반 세차는 48시간 후에 실시합니다.