GlasShield
글라스쉴드
나지올 · Nasiol GlasShield · GlassShield · 나시올 글라스쉴드
GlasShield is a high-durability nano rain-repellent coating developed for automotive windshields and exterior glass surfaces. Once applied, the formula bonds to the glass and causes rain to bead up and slide away at speed, significantly reducing wiper usage and improving driver visibility in all weather. A single application delivers up to two years of protection.
GlasShield는 자동차 앞유리와 외부 유리면을 위한 고내구성 나노 발수 코팅입니다. 도포 후 빗물이 작은 물방울 맺힘 형태로 빠르게 흘러내려 와이퍼 사용 빈도를 낮추고 악천후에서도 선명한 시야를 유지합니다. 1회 시공으로 최대 2년 지속됩니다.
- Brand
- Nasiol
- Categories
- Exterior : Glass Sealant
- Primary dilution
- RTU
Key features
- Up to 2 years or 80,000 wiper cycles durability
- Strong water-beading effect reduces wiper reliance
- Delays ice formation on glass
- Suitable for windshields, side windows, and rear glass
- High chemical resistance and easy-clean surface
- All-season protection for all vehicle types
Dilution
- Exterior : Glass Sealant — RTU (1:0) (primary)
Usage
- Apply in a shaded area at temperatures between 5°C and 30°C with humidity below 50%. The surface must be cool and free of moisture.
- Clean the surface thoroughly and dry with a lint-free microfiber cloth. Wear the provided nitrile gloves.
- Spray approximately 20 times per square meter using the bottle, then immediately buff with the provided cotton cloth. Do not use a microfiber cloth for application.
- Allow the coated surface to cure for 24 hours away from sunlight, water, and contaminants.
- After use, turn the bottle upside down and spray until the nozzle is clear to prevent clogging.
핵심 특징
- 최대 2년 또는 80,000회 와이퍼 사용 내구성
- 강력한 물방울 맺힘으로 와이퍼 의존도 감소
- 유리 결빙 지연 효과
- 앞유리, 측면 유리, 후방 유리 모두 적용 가능
- 높은 내화학성 및 손쉬운 세척
- 모든 차종과 계절에 적합
사용법
- 온도 5–30°C, 습도 50% 이하의 그늘진 환경에서 작업합니다. 표면은 서늘하고 수분이 없어야 합니다.
- 표면을 깨끗이 세척하고 보풀 없는 마이크로파이버 천으로 건조합니다. 제공된 니트릴 장갑을 착용합니다.
- 제공된 병으로 1㎡당 약 20회 분사하고 즉시 면 천으로 버핑합니다. 마이크로파이버 천은 도포에 사용하지 마십시오.
- 코팅 후 24시간 동안 직사광선, 물, 오염물을 피하며 경화합니다.
- 사용 후 병을 거꾸로 들고 노즐이 비워질 때까지 분사하여 막힘을 방지합니다.