MetalGuard
메탈가드
나지올 · Nasiol MetalGuard · Metal Guard · Nasiol Metal Guard · 나시올 메탈가드
MetalGuard is a one-component nano ceramic coating formulated to protect marine metal components such as rails, anchors, and carabiners from rust, corrosion, and saltwater damage. It forms a highly repellent protective layer that keeps metal parts clean and maintains a deep gloss even under harsh marine conditions.
메탈가드는 선박의 금속 부품을 녹, 부식, 염수 손상으로부터 보호하도록 설계된 단일 성분 나노 세라믹 코팅입니다. 강력한 발수층을 형성해 가혹한 해양 환경에서도 금속 부품을 깔끔하게 유지하고 깊은 광택을 지속합니다.
- Brand
- Nasiol
- Categories
- Exterior : Coating
- Primary dilution
- RTU
- pH
- acid (5.75)
Key features
- Rust and corrosion resistance
- Protection against saltwater and UV exposure
- Instant gloss with remarkable water repellency
- Easy-to-clean surface after coating
- Effective oxidation barrier
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Ensure the surface is completely clean and dry; do not apply in direct sunlight.
- Test on a small area first before treating the entire surface.
- Put on protective nitrile gloves and shake the product gently.
- Spray an appropriate amount of product onto the surface, working in sections no larger than 1 m².
- Immediately buff the surface with a dry, lint-free microfiber cloth in circular motions.
- Allow 24 hours for the coating to dry and cure.
핵심 특징
- 녹 및 부식 저항성
- 염수 및 자외선 차단
- 즉각적인 광택과 뛰어난 발수성
- 코팅 후 손쉬운 세척
- 효과적인 산화 방지 효과
사용법
- 표면이 완전히 깨끗하고 건조한 상태인지 확인하고, 직사광선 아래에서는 시공하지 않습니다.
- 전체 표면을 처리하기 전에 작은 부위에 먼저 테스트합니다.
- 보호용 니트릴 장갑을 착용하고 제품을 부드럽게 흔듭니다.
- 1m² 이하 구역씩 나누어 표면에 적당량을 분사합니다.
- 즉시 건조하고 보풀 없는 마이크로파이버 천으로 원형 동작으로 버핑합니다.
- 건조 및 경화를 위해 24시간 동안 기다립니다.