NeoCoatX
네오코트엑스
나지올 · Nasiol NeoCoatX · 나시올 네오코트엑스
NeoCoatX is a user-friendly nano ceramic coating that delivers professional-grade protection with straightforward application, guarding vehicle paintwork, headlights, taillights, rims, and chrome parts against UV rays, aggressive chemicals, bird droppings, and road salt. Its flexible flashing time accommodates beginners and enthusiasts alike, providing up to one year of deep gloss and high hydrophobicity from a single 100 mL bottle sufficient for up to five cars.
NeoCoatX는 초보자도 쉽게 시공할 수 있는 나노 세라믹 코팅으로, 도장면·헤드라이트·휠 등을 자외선, 강산·강알칼리, 버드드롭 등 외부 오염으로부터 보호합니다. 유연한 플래싱 타임 덕분에 부담 없이 시공할 수 있으며, 최대 1년간 깊은 광택과 발수 성능을 유지합니다.
- Brand
- Nasiol
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Easy application with flexible flashing time
- High chemical resistance
- Up to 1 year of durability
- Suitable for detailing enthusiasts
- One bottle covers up to 5 vehicles
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Avoid direct sunlight; work only on cool surfaces. Wash the vehicle thoroughly and prepare the surface with Nasiol Clean to improve coating adhesion.
- Place a suede cloth on the applicator block. Shake the product gently, then pour 2–3 mL per 1 m² onto the cloth; keep the lid closed during application.
- Work on areas no larger than 1 m² at a time. Spread the product in a crisscross motion over the surface.
- Once water beading appears (approx. 2–3 minutes), wipe off excess product with the Nasiol microfiber cloth using linear strokes. Replace the suede cloth every 3–4 panels.
- Buff the surface with the microfiber cloth in circular motions to finish.
- Optionally, apply a second layer after waiting 1 hour.
- Keep the coated surface away from water and contaminants for 24 hours; wait 48 hours before detergent-based washing.
핵심 특징
- 유연한 플래싱 타임으로 간편한 시공
- 높은 내화학성
- 최대 1년 내구성
- 디테일링 입문자에게 적합
- 한 병으로 최대 5대 시공 가능
사용법
- 직사광선을 피하고 시원한 표면에서 작업합니다. 차량을 깨끗이 세차한 후 Nasiol Clean으로 표면을 정리하여 코팅 접착력을 높입니다.
- 어플리케이터 블록에 스웨이드 천을 올립니다. 제품을 가볍게 흔든 후 1 m²당 2–3 mL를 천에 도포하고, 시공 중 뚜껑을 닫아 둡니다.
- 1 m² 이하 구역에 크로스 방향으로 제품을 펴 바릅니다.
- 물방울 맺힘이 시작되면(약 2–3분 후) 마이크로파이버 천으로 직선 방향으로 잔여물을 닦아냅니다. 스웨이드 천은 3–4개 패널마다 교체합니다.
- 마이크로파이버 천으로 원형 동작으로 마무리 버핑합니다.
- 원하는 경우 1시간 후 2차 레이어를 추가 시공합니다.
- 24시간 동안 수분과 오염물질을 피하고, 48시간 후부터 샴푸 세차가 가능합니다.