NANOSKIN HYPER SUDS Dilution Ratios & User Guide

NANOSKIN HYPER SUDS dilution ratio and pH specification chart

하이퍼 수즈

NANOSKIN HYPER SUDS — Exterior : Bucket Car Shampoo, neutral pH, base dilution 1:800. At 1:800, mix about 1.3 ml of NANOSKIN HYPER SUDS per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/nanoskin/hyper-suds

NANOSKIN 하이퍼 수즈 — Exterior : Bucket Car Shampoo, pH neutral, 기본 희석 1:800. 1:800 기준 물 1L당 NANOSKIN 하이퍼 수즈 약 1.3ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/nanoskin/hyper-suds

HYPER SUDS is an ultra-concentrated pH-neutral car wash shampoo with an 800:1 dilution ratio, allowing a single 16 oz bottle to produce over 100 gallons of wash water. The biodegradable, phosphate-free formula generates rich, stable foam that safely lifts dirt and grime from paint, clear coat, glass, trim, and rubber without stripping wax or protective coatings.

HYPER SUDS는 pH 중성의 초고농축 세차 샴푸로, 800:1 희석 비율 덕분에 16oz 한 병으로 100갤런 이상의 세차액을 만들 수 있습니다. 생분해 가능한 무인산 포뮬러가 풍부하고 안정적인 거품을 형성하여 왁스와 보호 코팅을 손상시키지 않고 도장면, 클리어 코트, 유리, 트림, 고무에서 오염물을 안전하게 제거합니다.

Brand
NANOSKIN
Categories
Exterior : Bucket Car Shampoo, Exterior : Foam
Primary dilution
1:800
pH
neutral (7)
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Exterior : Bucket Car Shampoo (primary)1:8001:800

Usage

  1. Mix the shampoo at 0.8 oz per 5 gallons of water in a wash bucket.
  2. Rinse the vehicle surface with water first to flush away loose dirt.
  3. Wash and rinse the vehicle in sections to prevent soap from drying on the surface.
  4. Start from the roof and work the suds down through the hood, trunk, and sides.
  5. Dry the surface thoroughly with clean, soft towels.

핵심 특징

  • 800:1 초고농축 희석 비율
  • pH 중성; 왁스, 실란트, 세라믹 코팅 안전
  • 생분해 가능한 무인산 포뮬러
  • 풍부하고 안정적인 거품, 우수한 밀착 시간
  • 폼 캐논, 폼 건, 버킷 세차 모두 호환
  • 도장면, 고무, 비닐, 유리, 플라스틱 트림에 안전

사용법

  1. 버킷에 물 5갤런당 샴푸 0.8oz 비율로 희석합니다.
  2. 세차 전 차량 표면을 물로 헹궈 느슨한 오염물을 먼저 제거합니다.
  3. 표면에 비눗물이 마르지 않도록 구역을 나눠 세차하고 각 구역을 바로 헹굽니다.
  4. 루프에서 시작하여 후드, 트렁크, 측면 순서로 거품을 흘려내립니다.
  5. 깨끗하고 부드러운 타월로 표면을 완전히 건조시킵니다.

Also known as: 나노스킨, NANOSKIN HYPER SUDS, NS HYPER SUDS, HS, NANOSKIN HS, NS HS, 나노스킨 하이퍼 수즈, 나노스킨 HS, NA-HSS128, NA-HSS

한국어로 보기

Sources

Related products

More from NANOSKIN

More Bucket Car Shampoo products

Explore more