NANOSKIN BUBBLE BATH Dilution Ratios & User Guide

NANOSKIN BUBBLE BATH dilution ratio and pH specification chart

버블 배스

NANOSKIN BUBBLE BATH — Exterior : Bucket Car Shampoo, neutral pH, base dilution 1:128. At 1:128, mix about 7.8 ml of NANOSKIN BUBBLE BATH per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/nanoskin/bubble-bath

NANOSKIN 버블 배스 — Exterior : Bucket Car Shampoo, pH neutral, 기본 희석 1:128. 1:128 기준 물 1L당 NANOSKIN 버블 배스 약 7.8ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/nanoskin/bubble-bath

NANOSKIN BUBBLE BATH is a high-foaming car wash shampoo concentrated at 128:1 for economical use. Its pH-neutral formula cleans paint, clear coat, rubber, vinyl, glass, and plastics without stripping wax, sealant, or ceramic coatings, and the thick suds help lubricate the surface during washing and rinse off cleanly.

나노스킨 버블 배스는 128:1로 희석해 쓰는 고발포 세차 샴푸로, 경제적인 사용량으로 세차할 수 있습니다. pH 중성 배합이라 도장, 클리어코트, 고무, 비닐, 유리, 플라스틱을 세정하면서 왁스·실란트·세라믹 코팅을 그대로 두고, 두꺼운 거품이 세차 중 표면 윤활을 도와 깔끔하게 헹궈집니다.

Brand
NANOSKIN
Categories
Exterior : Bucket Car Shampoo, Exterior : Foam
Primary dilution
1:128
pH
neutral (7)
Last updated
2026-07-11

Key features

Dilution

UseDilutionRatio
Exterior : Bucket Car Shampoo (primary)1:1281:128

Usage

  1. Add soap to an empty bucket, then fill with water to build suds; mix 1 oz per gallon for hand washing.
  2. Rinse the vehicle with water to flush loose dirt.
  3. Starting from the roof, wash and rinse in sections, working down to the hood, trunk, and sides.
  4. Apply suds with a wash mitt using light pressure.
  5. Rinse each section with clean water, top to bottom.
  6. Dry the surface with a chamois or soft microfiber towel.

핵심 특징

  • 128:1 고농축 희석
  • pH 중성 배합으로 왁스·코팅층 유지
  • 밀착력 있는 풍부한 거품
  • 도장·고무·비닐·유리·플라스틱에 안전
  • 생분해성, 인산염 무첨가
  • 폼 캐논·폼 건·버킷 세차 모두 사용

사용법

  1. 버킷에 샴푸를 먼저 넣고 물을 채워 거품을 만듭니다. 손세차 시 물 1갤런당 1온스로 희석합니다.
  2. 차량 표면을 물로 헹궈 느슨한 오염을 먼저 씻어냅니다.
  3. 루프부터 시작해 후드, 트렁크, 측면 순서로 구역을 나눠 세차와 헹굼을 진행합니다.
  4. 세차 미트에 거품을 묻혀 가벼운 압력으로 도장면을 닦습니다.
  5. 위에서 아래 방향으로 각 구역을 깨끗한 물로 헹굽니다.
  6. 세무 타월이나 부드러운 마이크로파이버 타월로 표면을 건조합니다.

Also known as: 나노스킨, NANOSKIN BUBBLE BATH, NS BUBBLE BATH, BB, NANOSKIN BB, NS BB, 나노스킨 버블 배스

한국어로 보기

Sources

Related products

More from NANOSKIN

More Bucket Car Shampoo products

Explore more