NANOSKIN FIRE STORM Dilution Ratios & User Guide

NANOSKIN FIRE STORM dilution ratio and pH specification chart

파이어 스톰

NANOSKIN FIRE STORM — Exterior : Degreaser&Dewaxing, alkali pH, base dilution 1:100. At 1:100, mix about 10 ml of NANOSKIN FIRE STORM per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/nanoskin/fire-storm

NANOSKIN 파이어 스톰 — Exterior : Degreaser&Dewaxing, pH alkali, 기본 희석 1:100. 1:100 기준 물 1L당 NANOSKIN 파이어 스톰 약 10ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/nanoskin/fire-storm

NANOSKIN FIRE STORM is a hyper-concentrated all-purpose cleaner and degreaser used at a 100:1 dilution, allowing a single 5-gallon container to yield 55 gallons of working-strength 10:1 concentrate. It cuts through oil-based soiling on vehicle exteriors — including rocker panels, door jambs, wheel wells, undercarriages, suspension components, and engine bays — with a simple spray-dwell-rinse process that requires no vigorous scrubbing.

나노스킨 파이어 스톰은 100:1로 희석해 사용하는 초고농축 다목적 세정제 겸 탈지제로, 5갤런 1통으로 10:1 작업 농축액 55갤런을 만들 수 있습니다. 로커 패널, 도어 잼, 휠 웰, 하부 차체, 서스펜션 부품, 엔진룸 등 차량 외부의 유성 오염물을 분사 후 잠시 방치했다가 헹구는 방식으로 간편하게 제거합니다.

Brand
NANOSKIN
Categories
Exterior : Degreaser&Dewaxing, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:100
pH
alkali (12)
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Exterior : Degreaser&Dewaxing (primary)1:1001:100
Exterior : Pre-washing (Pretreatment)1:1001:100

Usage

  1. Mix undiluted FIRE STORM concentrate with water at 100:1 to produce 55 gallons of 10:1 working concentrate.
  2. Decant the 10:1 concentrate into a trigger sprayer and dilute again 10:1 with water to prepare a ready-to-use solution.
  3. Spray the diluted solution thoroughly onto the surface to be cleaned or degreased.
  4. Allow product to dwell on the surface for 30–60 seconds; agitate with a brush if needed.
  5. Rinse thoroughly with water; use a pressure washer for good results.

핵심 특징

  • 100:1 희석의 초고농축 (5갤런으로 55갤런 작업 농축액 생산)
  • 유성 오염물과 그리스를 신속하게 분해
  • 로커 패널, 도어 잼, 휠 웰, 엔진룸, 하부 차체에 효과적
  • 분사 후 방치·헹굼 방식 — 강한 문지름 불필요
  • 고압 세척기 사용 시 최적의 효과

사용법

  1. 파이어 스톰 원액을 물과 100:1 비율로 혼합하여 10:1 작업 농축액 55갤런을 만듭니다.
  2. 10:1 농축액을 트리거 스프레이어에 옮겨 담고 물과 다시 10:1로 희석하여 바로 사용할 수 있는 용액을 준비합니다.
  3. 세정하거나 탈지할 표면 전체에 희석 용액을 고루 뿌립니다.
  4. 30~60초간 표면에 그대로 두며, 필요하면 브러시로 가볍게 문지릅니다.
  5. 물로 깨끗이 헹굽니다. 최상의 결과를 위해 고압 세척기를 사용합니다.

Also known as: 나노스킨, NANOSKIN FIRE STORM, NS FIRE STORM, FS, NANOSKIN FS, NS FS, 나노스킨 파이어 스톰, 나노스킨 FS

한국어로 보기

Sources

Related products

More from NANOSKIN

More Degreaser&Dewaxing products

Explore more