WET SHINE
웻 샤인
NANOSKIN WET SHINE is a clear silicone aerosol coating that delivers an instant water-resistant high-gloss shine on non-rubber exterior surfaces. It is specially formulated for vinyl, body moldings, bumpers, bumper guards, engine compartments, and door jambs, and its fast-drying formula brightens and renews plastic surfaces while leaving a brilliant wet-look sheen.
나노스킨 웻 샤인은 비고무 외장 표면에 즉각적인 발수성 고광택 마감을 제공하는 투명 실리콘 에어로졸 코팅입니다. 비닐, 보디 몰딩, 범퍼, 범퍼 가드, 엔진룸, 도어 잼 등에 적합하게 설계되었으며 빠르게 건조되어 플라스틱 표면의 윤기를 살려 줍니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Coating
Key features
- Clear silicone aerosol coating
- Water-resistant high-gloss finish
- No wiping required — works instantly
- Suitable for vinyl, body moldings, bumpers, and door jambs
- Brightens and renews plastic surfaces
- Aerosol spray reaches hard-to-access areas
Usage
- Shake the can well before use.
- Clean the surface thoroughly to remove all dirt, dust, oil, and grease; dry completely.
- Test-spray on an inconspicuous area first to verify compatibility.
- Hold the can 10–12 inches from the surface and apply using a stroking motion; apply two or more thin coats rather than one heavy coat. Best results at 70–80°F.
- Remove any overspray immediately and wipe off residue from plastic and painted panels to avoid staining.
- If desired, buff the surface with a soft cloth after the coating has dried for a few minutes.
핵심 특징
- 투명 실리콘 에어로졸 코팅
- 발수성 고광택 마감
- 닦을 필요 없이 즉시 효과 발현
- 비닐, 보디 몰딩, 범퍼, 도어 잼 등에 적합
- 플라스틱 표면 윤기 복원
- 에어로졸 분사로 좁은 공간도 처리 가능
사용법
- 사용 전 캔을 충분히 흔들어 줍니다.
- 표면의 먼지, 기름, 오염물을 완전히 제거하고 건조시킵니다.
- 눈에 잘 띄지 않는 부위에 먼저 테스트 분사하여 적합성을 확인합니다.
- 캔을 표면에서 25~30cm 거리를 유지하고 스트로크 동작으로 분사합니다. 한 번에 두껍게 도포하지 말고 두 번 이상 얇게 도포하며, 최적 온도는 21~27°C입니다.
- 오버스프레이는 즉시 제거하고 플라스틱 및 도장 패널에 묻은 잔여물은 얼룩 방지를 위해 닦아냅니다.
- 원하면 수 분 건조 후 부드러운 천으로 표면을 닦아냅니다.