Aero Metal Coating
에어로 메탈 코팅
serv · 서브페이스 · 서브 · servFaces Aero Metal Coating · SF Aero Metal Coating · AMC · servFaces AMC · SF AMC · 서브페이시스 에어로 메탈 코팅 · 서브페이시스 AMC · SF10049.1
Aero Metal Coating is a clear, hard-wearing coating made for aircraft metal surfaces. Once cured, it forms a scratch- and dirt-resistant layer that handles heat up to 1,090°C and stands up to acids, salt water, weathering, and mechanical stress.
에어로 메탈 코팅은 항공기 금속 표면을 위한 투명하고 내구성 있는 코팅입니다. 경화 후에는 긁힘과 오염에 강한 막을 이루며 최대 1,090°C의 열을 견디고 산성, 염수, 풍화, 기계적 충격에도 버팁니다.
- Brand
- servFaces
- Categories
- Exterior : Coating
Key features
- For aircraft metal surfaces
- Heat resistant up to 1,090°C
- Scratch- and dirt-resistant layer
- Resists acids, salt water, weathering after curing
- Self-healing thermoelastic film
- Clear finish with added surface hardness
- Dust-dry within about 120 minutes
Usage
- Clean the surface fully and remove all grease before applying.
- Apply with an applicator on smooth surfaces, or spray or roll onto rough, absorptive substrates.
- After about 1 to 2 minutes of reaction, wipe or polish off any excess with a microfiber cloth.
- Keep the treated surface away from dirt and moisture for at least 18 to 24 hours.
- Allow roughly 6 to 8 days for full cure, varying with temperature and humidity (30 to 80% RH, 10 to 35°C).
핵심 특징
- 항공기 금속 표면용
- 최대 1,090°C 내열
- 긁힘 및 오염 저항막
- 경화 후 산성, 염수, 풍화 저항
- 자가복원 열탄성 피막
- 표면 경도를 더한 투명 마감
- 약 120분 내 표면 건조
사용법
- 도포 전 표면을 깨끗이 세정하고 유분을 모두 제거합니다.
- 매끈한 표면에는 어플리케이터로 바르고, 거칠고 흡수성 있는 표면에는 분사하거나 롤러로 바릅니다.
- 약 1~2분 반응 후 마이크로파이버 천으로 잔여물을 닦거나 폴리싱합니다.
- 도포 후 최소 18~24시간 동안 오염과 수분을 피해 표면을 보호합니다.
- 완전 경화는 온도와 습도(30~80% RH, 10~35°C)에 따라 약 6~8일 정도 소요됩니다.