Si3D HD
Nanolex Si3D HD is a high-density ceramic sealant based on a hybrid polysilazane chemistry that forms a hard, hydrophobic protective layer. It shields paintwork from scratches, UV exposure, and chemical contaminants while producing a deep, mirror-like gloss. Marketed durability is approximately 75,000 km or 75 washes.
Nanolex Si3D HD는 하이브리드 폴리실라잔 화학에 기반한 고밀도 세라믹 실란트로, 단단한 발수 보호막을 형성합니다. 도장면을 스크래치, 자외선, 화학적 오염으로부터 보호하면서 깊고 거울 같은 광택을 부여합니다. 제조사 표기 내구성은 약 75,000km 또는 75회 세차입니다.
- Brand
- Nanolex
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- High surface hardness for scratch and abrasion resistance
- Approximately 75,000 km or 75 washes of marketed durability
- Protection against UV and chemical contaminants
- Deep, mirror-like gloss
- Formulated for professional detailers
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Wash and fully dry the paint, then wipe down with Nanolex EX to remove residues.
- Place 5-10 drops on a microfiber applicator pad and spread evenly across the panel.
- Let the product flash for about 3 minutes, then buff off thoroughly with a clean microfiber towel.
- Keep the surface dry for at least 12 hours; full cure is reached after roughly 72 hours.
핵심 특징
- 스크래치와 마모에 대한 높은 표면 경도
- 표기 내구성 약 75,000km 또는 75회 세차
- UV·화학적 오염으로부터 도장 보호
- 깊고 거울 같은 광택
- 전문 디테일러를 위한 포뮬러
사용법
- 도장면을 세차해 완전히 건조한 뒤 Nanolex EX로 잔여물을 닦아내십시오.
- 마이크로화이버 어플리케이터에 5~10방울을 떨어뜨려 패널 전체에 고르게 펴 바르십시오.
- 약 3분간 두었다가 깨끗한 마이크로화이버 타월로 충분히 닦아 내십시오.
- 최소 12시간 동안 물 접촉을 피하고, 약 72시간 후 완전 경화에 도달합니다.
Also known as: 나노렉스, Nanolex Si3D HD, Si3D High-Density, Si3D HD Ceramic Sealant, Si3D Cerabide HD, 시쓰리디 HD, 나노렉스 Si3D HD, 세라믹 코팅 HD, 고밀도 세라믹 실란트, Si3D HD Versiegelung