Heavy Cut Polish
헤비 컷 폴리시
Highly effective abrasive polish specially developed to remove deep scratches, severe swirls and paintwork defects up to 2000 grit while providing a very good finish. Contains advanced calcined aluminium oxide abrasives that enable quick and efficient defect correction while leaving a smooth, glossy surface. Suitable for all paint types including hard and soft paints, applicable by hand or machine, and ideal as a basis for the next polishing step.
2000그릿까지의 깊은 스크래치, 심한 스월 및 도장 결함을 제거하면서 매우 좋은 마감을 제공하도록 특별히 개발된 매우 효과적인 연마 폴리시입니다. 빠르고 효율적인 결함 보정을 가능하게 하는 고급 소성 산화알루미늄 연마제를 함유하여 매끄럽고 광택 있는 표면을 남깁니다. 단단한 도장과 부드러운 도장을 포함한 모든 도장 종류에 적합하며 손이나 머신으로 적용 가능하고 다음 폴리싱 단계의 기초로 이상적입니다.
- Brand
- Nanolex
- Categories
- Exterior : Polishes
- pH
- neutral (8)
Key features
- Maximum abrasion: Removes deep scratches, swirls and severe paint defects
- Advanced abrasives: Ensures quick and effective defect correction
- Ideal for all paint types: Suitable for all paint types, including hard and soft paints
- Glossy finish: Leaves a uniform finish for the next polishing step
- Developed, tested, and produced in Germany
Usage
- Preparation: Thoroughly clean the paint surface and make sure it is free of dirt and dust.
- Application: Apply a small amount of Nanolex Heavy Cut Polish to a Nanolex Heavy Cut Polishing Pad.
- Buffing: Spread the polish with slow movements using a rotary or eccentric polishing machine, slowly increasing the speed until the polish film becomes transparent.
- Post treatment: For a perfect finish, use a finer polish such as Nanolex Medium Cut or Finishing Polish.
핵심 특징
- 최대 연마력: 깊은 스크래치, 스월 및 심각한 도장 결함 제거
- 고급 연마제: 빠르고 효과적인 결함 보정 보장
- 모든 도장 타입에 이상적: 단단한 도장과 부드러운 도장을 포함한 모든 도장 종류에 적합
- 광택 있는 마감: 다음 폴리싱 단계를 위한 균일한 마감 제공
- 독일에서 개발, 테스트 및 생산
사용법
- 준비: 도장면을 꼼꼼히 세척하고 먼지와 오염이 없도록 합니다.
- 도포: Nanolex 헤비 컷 폴리싱 패드에 소량의 헤비 컷 폴리시를 묻힙니다.
- 버핑: 로터리 또는 편심 폴리셔로 천천히 폴리시를 펴 바른 후 폴리시 막이 투명해질 때까지 점차 속도를 높입니다.
- 후처리: 완벽한 마감을 위해 Nanolex Medium Cut 또는 Finishing Polish와 같은 더 미세한 폴리시를 사용합니다.