Nanolex 헤비 컷 폴리시 희석비 & 사용 가이드

Nanolex 헤비 컷 폴리시 희석비 pH 스펙 카드

Heavy Cut Polish

약 2000그릿 수준의 깊은 스크래치, 심한 스월, 도장 결함을 보정하는 연마형 컴파운드입니다. 소성 알루미나 연마제가 빠르게 결함을 깎아내고 다음 폴리싱 단계로 이어갈 수 있는 매끄러운 표면을 남깁니다. 단단한 클리어와 무른 클리어 모두에 사용할 수 있고 손작업과 머신 작업 모두 가능합니다.

브랜드
Nanolex
카테고리
Exterior : Polishes
기본 희석 비율
RTU
pH
neutral (8)
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 도장을 세차하고 표면에 분진과 입자가 없도록 정돈합니다.
  2. 나노렉스 헤비컷 폴리싱 패드 위에 헤비컷 폴리시를 소량 올립니다.
  3. 로터리 또는 DA 폴리셔로 저속에서 펴 바른 뒤, 막이 반투명해질 때까지 속도를 올립니다.
  4. 이후 나노렉스 미디엄컷 또는 피니싱 폴리시로 마감 정리합니다.

An abrasive compound for correcting deep scratches, heavy swirls and paint defects up to roughly 2000 grit. Calcined aluminium oxide abrasives cut quickly while leaving a smooth, refined surface ready for a finer polishing step. Works on hard and soft clear coats, by hand or machine.

Key features

  • Strong cutting power for deep scratches and heavy swirls
  • Calcined aluminium oxide abrasive system
  • Compatible with hard and soft clear coats
  • Leaves a uniform surface for the next polishing step
  • Hand or machine application
  • Made in Germany

Usage

  1. Wash and decontaminate the paint so the surface is free of dust and grit.
  2. Place a small amount of Heavy Cut Polish onto a Nanolex Heavy Cut polishing pad.
  3. Spread at low speed with a rotary or DA polisher, then raise speed until the film turns translucent.
  4. Refine the finish afterwards with a Nanolex Medium Cut or Finishing Polish.

다른 이름: 나노렉스, Nanolex Heavy Cut Polish, Nanolex Heavy Polish, 나노렉스 헤비 컷 폴리시, 나노렉스 헤비 폴리시, 강 연마제, 강 컷 폴리시

View in English

출처

관련 제품

Nanolex의 다른 제품

같은 카테고리(Polishes) 제품

더 보기