GERcollector Snow Foam
거컬렉터 스노우 폼
A highly concentrated, extremely high-foaming and foam-stable alkaline pre-cleaner whose balanced surfactant mix dissolves and removes stubborn soiling such as insects, oils, grease and soot. It also removes waxes, silicones and polish residues to optimally prepare the vehicle for treatment with Nanolex sealants. Corrosion inhibitors protect sensitive components like anodized aluminium and ensure good material compatibility.
곤충, 오일, 기름때, 그을음 등 강한 오염을 분해 및 제거하는 고농축, 고기포, 기포 안정형 알칼리성 프리클리너입니다. 왁스, 실리콘, 폴리시 잔여물도 함께 제거해 Nanolex 실란트 시공 전 표면을 최적으로 준비합니다. 부식 방지제가 아노다이즈드 알루미늄 등 민감한 부품을 보호하며 우수한 소재 호환성을 보장합니다.
- Brand
- Nanolex
- Categories
- Exterior : Foam, Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:4~1:8
- pH
- alkali
Key features
- Effective cleaning - Dissolves and removes stubborn dirt such as insects, oils, grease and soot quickly and efficiently
- Gentle on materials - Corrosion inhibitors protect sensitive components and ensure good material compatibility
- Preparation for sealing - Removes waxes, silicones and polish residues to optimally prepare the vehicle for treatment with Nanolex sealants
- Foamy and stable - Forms a stable foam that enables thorough and even cleaning
- Developed, tested and produced in Germany
- Net Volume 750 ml
- Ideal for thorough cleaning and preparation of vehicle surfaces
- Safe for all vehicle surfaces and environmentally friendly
Dilution
- Exterior : Foam — 1:4~1:8 (1:4-8) (primary)
- Exterior : Pre-washing (Pretreatment) — 1:4~1:8 (1:4-8)
Usage
- Preparation: Dilute GERcollector Snow Foam with water at 1:4 to 1:8 depending on the degree of soiling.
- Make sure the surface to be cleaned is cool and not in direct sunlight to prevent rapid evaporation. Have a foam gun or pump sprayer ready.
- Spray the diluted solution evenly onto the surface, ensuring all areas are well wetted.
- Let the product dwell for 2-3 minutes to loosen the dirt. Agitate heavily soiled areas with a sponge or soft brush. Do not allow the product to dry on the surface.
- Rinse the treated surfaces thoroughly with a pressure washer or clean water to remove all cleaner residue.
- Check the surface for any remaining stains or residue and repeat if necessary. Dry with a soft microfiber towel or allow it to air dry to avoid water spots.
핵심 특징
- 효과적인 세정 - 곤충, 오일, 기름때, 그을음 등 강한 오염을 빠르고 효율적으로 분해 및 제거
- 소재에 부드러움 - 부식 방지제가 민감한 부품을 보호하고 우수한 소재 호환성을 보장
- 실링 전 준비 - 왁스, 실리콘, 폴리시 잔여물을 제거해 Nanolex 실란트 시공 전 표면을 최적화
- 풍부하고 안정적인 거품 - 균일하고 철저한 세척이 가능한 안정적인 폼 형성
- 독일에서 개발 테스트 생산
- 용량 750ml
- 차량 표면의 집중 세척 및 시공 전 준비에 이상적
- 모든 차량 표면에 안전하며 친환경적
사용법
- 준비: 오염 정도에 따라 GERcollector 스노우 폼을 물과 1:4~1:8 비율로 희석합니다.
- 세척할 표면이 시원하고 직사광선이 없는 상태인지 확인하여 세정제가 빨리 마르지 않도록 합니다. 폼건 또는 펌프 스프레이어를 준비합니다.
- 희석한 용액을 처리할 표면에 균일하게 분무하여 모든 부위가 충분히 적셔지도록 합니다.
- 오염이 분해되도록 2~3분간 작용시키고, 강한 오염 부위는 스펀지나 부드러운 솔로 닦아냅니다. 표면에서 마르지 않게 주의합니다.
- 고압세척기 또는 깨끗한 물로 표면을 충분히 헹궈 세정제 잔여물을 모두 제거합니다.
- 남은 얼룩이나 잔여물이 없는지 확인하고 필요 시 반복합니다. 부드러운 마이크로화이버 타월로 닦거나 자연 건조시켜 물자국을 방지합니다.